Home » Product » Ceiling/drywall participation machine » Deflection heads track 64-76-96 rolling forming machine
main parts of Deflection heads track machine
drawing profile of Deflection heads track machine main parts of Deflection heads track machine Deflection heads track equipment punching part of Deflection heads track machine shearing part of Deflection heads track machine

Deflection heads track 64-76-96 rolling forming machine

1006

Deflection heads track 64-76-96 rolling forming machine allows you to make the deflection heads track 64-76-96 in batch fully automatic. Deflection heads track means the track head is narrower than the bottom. This kind of drawing profile is popular in ceiling and drawing mostly used in north Afican. Here are some drawing profiles for your reference:
drawing profile of Deflection heads track machine

All those drawing sizes could be made by one machine by adjusting the spacer to make different sizes. For the Deflection heads track 64-76-96 rolling forming machine parameters we design like the following:

Decoiler
Usage: It is used to support the steel coil and uncoil it in a turntable way.
Passive uncoil pulled by roll forming system.
1. Loading capacity: 1.5T
2. Uncoiling width: 300mm
3. Inner diameter: 450-550mm

decoiler of Deflection heads track machine

Feeding and leveling
This part will level coil to make sure it is neat clean and straight.

feeding and leveling of Deflection heads track machine

Roll forming machine
1. Size: 5300х1200х1400mm
2. Weight t: 5.8 tons
3. Voltage:380V/50HZ3Phase(as
customer’s request)
4. Roller fixer : Guide column
5. Frame : Arch frame of thickness 30mm
7. Drive mode: gear
8. Material of rollers: GCr12MoV
9. Material of shafts: 45# steel with
tempering
10. Diameter of shafts: φ50mm
11. Number of rollers :14 rollers 
12. Main power: 7.5kw
(Cycloidal planetary gear speed
reducer)

main parts of Deflection heads track machine 
Deflection heads track equipment 
Deflection heads track roll forming machine

Punching part
This part will together with shearing part.
1. Mould material: Gcr12
2. Power supper: Hydraulic Station

punching part of Deflection heads track machine

Shearing machine
1. Material of blades: Gcr12 quenched
2. Power supply : hydraulic power
3. Stroke switch : non-contact
photoelectric switch

shearing part of Deflection heads track machine

Hydraulic Station
1. Hydraulic motor Power: 5.5 kw
2. Hydraulic oil: 46#
Components: The system includes a set of hydraulic tank, a set of hydraulic oil pump, and four hydraulic pipes. And two electromagnetism valves: one is for punching hole, one for cutting.
Note: with the colling down system to make sure the shearing more powerful.

hydraulic station of Deflection heads track machine

For this machine, if you need to know more information, please contact us at any time.

Hot Products

online service
online service