Home » Product » House Frame Machine »Metal roof batten making machine
metal roof batten making machine
metal roof batten making machine Handling and storage of metal roof batten metal roof batten roll forming machine metal roof batten

Metal roof batten making machine

1006

To meet the high demand of engineers and developers, metal roof batten making machine can make metal roof batten in batch. It is a economical alternative to timber battens. The consistent quality and dimensional accuracy as well as the resistance to termite attack have proven the product's worthiness.

The drawing profile and finished product of metal roof batten:

metal roof batten

Handling and storage of metal roof batten

All metal roof battens should be kept dry and stored under cover and above the ground.To maximize the steel batten life cycle, steel sections which are exposed to water must be separated and air dried as soon as possible to remove any moisture retention.
Handling and storage of metal roof batten

We use the metal roof batten making machine to produce the high quality finished product. There are some parameters of metal roof batten making machine for your reference.

Size: 4800х800х1400Weight t: 2.2tons
Voltage:380V/50HZ3Phase(as customer's request)
Roller fixer : Guide column
Frame : middle plate welded
Memorial arch frame type
Frame thickness:25mm
Drive mode: gear
Material of rollers: GCr12 ,QUENCING 58-60° dedicated processing
Material of shafts: 45# steel with tempering
Diameter of shafts: φ50mm
Number of rollers :12rollers
Main power: 5.5 kw
Speed: 25 m/min
metal roof batten making machine
metal roof batten roll forming machine

Other parameters of the metal roof batten making machine

1.Decoiler
Usage: It is used to support the steel coil and uncoil it in a turntable way. Passive uncoil pulled by roll forming system
Loading capacity: 1.5TUncoiling width: 300mm
Inner diameter: 450-550mm
2.Shearing machine
Material of blades: Gcr12 quenched
Power supply : hydraulic power
Frame : Pillar style with rack & pinion system
Stroke switch : non-contact photoelectric switch
We will give 9 pieces of cutting blade for you to change to fix those different drawing profiles.
3.Hydraulic Station
Hydraulic motor Power: 3kw
Hydraulic oil: 46#
Components: The system includes a set of hydraulic tank, a set of hydraulic oil pump, and two hydraulic pipes. And three sets: one is for punching hole; one is for printing words and one for cutting. Sets of electromagnetism valves.
4.Electric Control System
1. Adopted PLC, transducer, touch panel from Delta Taiwan to ensure high speed with stability, precision and lifetime.
2.Other electric element are Delta
3. Equipped with movable switch, air break, radiator, transformer & electric leakage protector for operation convenience and safety.

Hot Products

online service
online service