Home » Product » Shutter Door Machine » Rolling shutter door panel making machine
finished products of Rolling shutter door panel making machine
Main Roll Forming System of shutter door panel machine shutter door panel drawing profile finished products of Rolling shutter door panel making machine seaming machine

Rolling shutter door panel making machine

1006

Rolling shutter door panel making machine allows you to do the batch production, the speed can reach 25m/min. The Rolling shutter door panel here I want to introduce that it is made from corrugated panels, not slats, to joint each other horizontally for manufacturing rolling shutter doors.

Take the following drawing profile for example: shutter door panel drawing profile

The finished products of Rolling shutter door panel making machine:

finished products of Rolling shutter door panel making machine
Roller Shutter Door Panels has the same function as Roller Shutter Door Slats but the machine design is totally different. And the shutter door panel is composed of three or four pieces of roller shutter door panels only (depends on the specific height of doors); the raw materials. For the machine design, please refer to the following machine parameters:

Uncoiler System
 

Usage: It is used to support the steel coil and uncoil it in a turnable way. Passive uncoil pulled by roll forming sysytem

Loading capacity:5T
Uncoiling width:400mm
Inner diameter: 450-508mm

Entry Beach
 

Usage: Put the raw material (steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron. Note: with the manual cutting and centering device for easy to use. And you can use it to cut at any length.

Main Roll Forming System
 

Feature: Ensure stability, precision and lifetime.
Usage: In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, chain transmission ( the first and the last roller,the down roller should be attached with the upper one with the chain drive.), roller surfaces polishing, hard plating , heat treatment and galvanizational treatment . The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.

Shearing Mechanism
 

Feature : Ensure stability, precision and cutting speed
Function : Automatic cutting controlled by PLC
It adopts the hydraulic drive and automatic location to decide the dimention and cut the target products
Material of blades: Gcr12 quenched
Power supply : hydraulic power
Frame : Pillar style with rack & pinion systme
Stroke switch : non-contact photoelectric switch
Components:It contains one set of cutting tools, one hydraulic tank and one cutter machine.

Hydraulic Station
 

It is controlled by gear wheel oil pump. Afer filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
Power:5.5 kw
Hydraulic oil: 40#
Components: The system includes a set of hydraulic tank , a set of hydraulic oil pump, two hydraulic pipes.and two sets of electromagnetism valves. Note: we will the big valve for easy use And with cooling down system, for summer more powerful.

For the Rolling shutter door panel making machine, it needs seaming machine together to make the connection tighter: Here is the seaming machine pictures for your reference:
seaming machine
Rolling shutter door panel making machine working videos for your reference:

For this machine, if you have any problem, please contact us at any time.
Hot Products

online service
online service