Home » Product » House Frame Machine »Steel framing roof batten roll forming machine
steel framing roof batten roll forming machine
steel framing roof batten steel framing roof batten roll forming machine

Steel framing roof batten roll forming machine

1006

Steel framing roof batten roll forming machine can produce economical light weight  steel framing roof batten with high speed. It features rolled edges for safe handling and a knurled top for extra grip. For more details, please check the followings.

The drawing profile and finished product of steel framing roof batten:

steel framing roof batten

Features of steel framing roof batten:

Steel framing roof batten are versatile and easy to use. They can be lapped, eliminating the need for on-site cutting, which makes them quick and easy to install. They are compatible with all pierce fix domestic roofing profiles and are fixed to the rafters with screws or nails through each flange. The roof is fixed to the battens with self-drilling screws.
1.A textured surface makes installation easy when fixing the cladding.
2.0.55mm thick hi-tensile steel is very strong, light weight and easy to cut with tin snips.
3.The 40mm high profile provides strength and is designed to nest for easy handling and storage.
4.Each Flange has a groove for easy fixing location.
5.The return edge provides safety and rigidity.
6.Available in stock lengths with mitred ends for easy installation at hips and valleys.

Some pictures of steel framing roof batten roll forming machine

steel framing roof batten roll forming machine

Parameters of main steel framing roof batten roll forming machine

Size: 4300х800х1400Weight t: 2.2tons
Voltage:380V/50HZ3Phase(as customer's request)
Roller fixer : Guide column
Frame : middle plate welded
Memorial arch frame type
Frame thickness:25mm
Drive mode: gear
Material of rollers: GCr12MoV
Material of shafts: 45# steel with tempering
Diameter of shafts: φ60mm
Number of rollers :13 rollers
Main power: 3kw

Installation of steel framing roof batten

Batten to Timber Fixing 
Fasten the batten to every truss or rafter with a 12x40mm timber fixing screw (minimum fixing size) through each flange.

Batten to Timber Fixing

Batten to Steel Fixing
Fasten the batten to every truss or rafter with a 10x16mm hex-head self-drilling screw (minimum fixing size)

Batten to Steel Fixing

Fixing the Roof Sheets 
Fasten the roof sheets to the batten as per the appropriate Stratco roofing specifications.

Fixing the Roof Sheets

Fixing the Ridge
Fix through the ridge flashing into the roofing batten as shown in right picture, using the appropriate cladding screws.

Fixing the Ridge

Lapping the Battens
To minimise cutting, lay the battens in one direction starting from one end of the roof. The overlap must be supported over a truss or rafter, refer to right picture. The minimum overlap is 100mm.

Lapping the Battens

We also have detail information about the roof and ceiling batten making machine and steel framing ceiling batten for you to reference.

Hot Products

online service
online service