Home » Product » House Frame Machine »Steel roof battens roll forming machine
steel roof battens roll forming machine
steel roof battens steel roof battens roll forming machine steel roof battens machine details of steel roof battens machine

Steel roof battens roll forming machine

1006

Steel Roof Battens are a versatile and easy to use batten, they can be fixed directly to the rafters using timber or metal self drilling screws, or nails through the flanges. The roof cladding is then fixed to the Battens using self drilling screws.

Here is a drawing profile and finished product of the steel roof battens

steel roof battens

Advantage of steel roof battens

Long life, quality: Roof Batten section is guaranteed a long life; all material conforms to Australian standards. Steel Roof Battens are impervious to white ants, borers or rotting. TrueCore zinc/ aluminium coated steel provides the best protection from the environment, giving long life to any building.
Labour and cost savings: Roof Batten section is manufactured locally by continuously roll-forming prefinished steel coil, and with the efficient profile it is a low cost building material. Ease of construction and fast fixing of frame members allow fast erection time, and low labour costs. A protective coating on the section means it will last for years without the need for attention, keeping maintenance costs very low.
Flexibility: By using Steel Roof Battens you have complete freedom of design, with alterations, additions and renovations also easily made. Indeed Roof Battens are suitable for applications other than roofing. Steel Roof Battens can be used for framing van bodies, floor stiffeners, bracing, awning support frames, furring channel and shelving.
Compatibility: Steel Roof Battens are compatible with all standard roof cladding materials, and it can also be used in combination with other systems such as timber.

Here is a picture of steel roof battens roll forming machine

steel roof battens roll forming machine
steel roof battens machine

Parameters of steel roof battens roll forming machine:

Size: 4800х800х1400
Weight t: 2.2tons
Voltage:380V/50HZ3Phase(as customer's request)
Roller fixer : Guide column
Frame : middle plate welded
Memorial arch frame type
Frame thickness:25mm
Drive mode: gear
Material of rollers: GCr12 ,QUENCING 58-60° dedicated processing
Material of shafts: 45# steel with tempering
Diameter of shafts: φ50mm
Number of rollers :12rollers
Main power: 5.5 kw
Speed: 25 m/min
Cycloidal planetary gear speed reducer
details of steel roof battens machine

Handling and storage of steel roof battens

If Roof Battens are to be stacked and left in the open for any length of time, ensure they are kept off the ground, with one end elevated to drain any collected moisture. Gloves should be worn when handling to prevent injury.

Performance of steel roof battens

Roof Batten - maximum spans and spacing (non-cyclonic) Maximum span - 1200mm Maximum spacing - Internal Spans - 1200mm End spans (Up to 900mm Span) - 900mm Note: the batten spacing must not exceed the manufacturers maximum recommended support spacing for the roof cladding material. These values are for buildings located under the following conditions as specified by AS.1170 Part 2, SAA Wind Code: Area - Non-Cyclonic Maximum Building Height - 5m Wind Velocity - 50m/s Internal Pressure Coefficient -+0.8 Terrain Category -3.

Hot Products

online service
online service