angle keel roll forming machine

Angle keel roll forming machine
Angle keel roll forming machine equipment consists of: discharge machine, the guide frame, forming the host, correction means, length cutting portion, receiving station, consisting of electrical control and so on. Bed as steel weldments. And for tempering, eliminate stress, avoid deformation of the fuselage.

A detailed description:
Triangle keel machine performance parameters
1. Unit rolling capacity: Wide ≤150mm, sheet thickness 0.6-2.0mm
2. Production speed: 6-13 m / min
3. The total installed capacity: about 5.5kw
4. Production area: 15 meters long, 2.5 meters wide X
Triangle keel machine is a strip of material, by continuous cold roll forming, producing complex cross-section profiles (products: light steel keel, paint keel, keel card, all kinds of construction profiles, steel, steel-lined door profiles, speed Hulan, etc.) and different specifications of cold-formed, paint unit equipment, PLC control.
Angle keel roll forming machine equipment consists of: discharge machine, the guide frame, forming the host, correction means, length cutting portion, receiving station, consisting of electrical control and so on.
I produced the triangular keel machine has the following advantages:
1. Device control PLC control, set up the system in normal production multiple security.
2. Bed as steel weldments. And for tempering, eliminate stress, avoid deformation of the fuselage.
3. The molded cast iron frame structure, and by tempering. Strong high, long service life.
4. The roller shaft material is 40Cr, and after quenching, hardness of HB280.
5. The mold material is GCr15, quenching, hardness: HRC56-62 ℃.
6. The transmission structure for the gearbox, each molding frame has a gear box, can ensure that equipment over time, high-intensity running, and long service life.

We also have high spend light keel roll forming machin and trangular light kell machine

Leave a Reply

Your email address will not be published. Required fields are marked *