Slitting Machine

Slitting Machine

 


Slitting Machine structure:
Slitting machine, cited material positioned by unwinding (unwinding), slitting slitting, winding (winding) and other components of the device. Its main function is the wide-roll material is provided in the longitudinal direction cut into narrow coils sized for slitting machine can be divided into a good variety, the most important points of the 14-inch, multi-knife slitting machine, round knife slitting machine , and other points of single-pole, there are points for the leather, there are sub-machine for PVC.

slitting machine
Slitting Machine features:
Points of the unit programmable logic design, automatically switch modes depending on the nature of the production line of the plate, can significantly improve production efficiency and reduce maintenance frequency.
Hanging material unwinding machine and winder expansion and contraction of the hydraulic cylinder with one piece design, low failure rate.
Spindle uncoiler, slitting the host, winding machines are equipped with disc brakes tension combination of high efficiency, in order to adjust the pneumatic circuit and automatically make instant Zhang forced braking action, so as not to loose coils under particular circumstances.
Pinch active feeding machine and automatically synchronized with the production line running.
Slitting host one-piece frame and separate transmission structure, can effectively improve the rigidity of the mechanical structure, while reducing the slitting blade vibration amplitude, improve product quality.
Scissors vertical axis reference plane amplitude accuracy are within 0.006mm, it can be better to extend tool life and ensure the accuracy of the finished product.

slitting machine
Bead wire using tension take-up and configure slip structure, can effectively improve the stability of mechanical operation.
Direct pressure tension damping structure using flexible, high wear resistance coefficient of wool felt for the fabric, to ensure smooth operation of equipment when; in addition, comes with pressure balancing device, so that the surface pressure of bilateral pressure equalization.
Separating mechanism with hydraulic binder combination can debug backpressure to stabilize the pressure, with the winding diameter increases automatically rise, and always effective to suppress coil.
Self-tension design finished rolling, and can increase the tightness of the finished rolling.

If you want to know more information about this machine you can contact us with Email  roofingmachine@zhongtuocn.com

 

Leave a Reply

Your email address will not be published. Required fields are marked *