C Section Purlin Forming Machine

C Section Purlin Forming Machine

Keeping in mind the diverse requirements of our clients we are involved in offering a wide range of Hidden Roof Roll Forming Machine. We Offered this products are highly reckoned among our clients due to their perfect finish and hassle free performance. These are used for producing which can be used in villas, theatres and many more places. Apart from this, these can be availed at industry leading prices.

C-Purlines-roll-forming-machines-3
Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 55mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 10 HP motor

Tooling

One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

Cutting Unit (Hydro)

Hydraulically operated power pack along with cutting die with 3 HP electrical.

Leave a Reply

Your email address will not be published. Required fields are marked *