China rolling shutter slats steel door making machine

China rolling shutter slats steel door making machine

Rolling shutter doors are connected in series with a multi-joint movable door. In a fixed slide, the upper and lower doors are rotated around the door’s upper reel. Rolling shutter doors are often widely used in shops. In the followings, i will show you more information about rollling shutter door machine.
 Working flow of Rolling shutter door machine :

Decoiler—–feeding——roll forming —— punching—–cutting—-output table

China rolling shutter slats steel door making machine components:

No. Name Qty
1. De-coiler 1 Set
2. Roll Forming Machine 1 Set
3. Punching device 1Set
4. Hydraulic Cutting Device 1 Set
5. PLC Control Box 1 Set
6. Output table 1 Set

China rolling shutter slats steel door making machine Technical Parameters

Material specification Galvanized and pre-painted galvanized steel.
Thickness 0.8 mm to1.2 mm.
Main motor power 5.5 kw.
Hydraulic station power 3 kw.
Feeding width 124mm.
Cover width 60mm.
Yield stress 235Mpa(33KSI) ~ 345Mpa (50KSI).
Roll forming Speed  20 m/minute.
Cutting Tolerance ±2mm
Manual Uncoiler Max. Capacity: 5000kgs.
Voltage As per customer’s request.
Numbers of stands 11 stands/stations/pairs.
Roller material 5# steel polished and coated with chrome HRC55-60°
Shaft diameter 70mm
Shaft diameter high grade No.45 steel after treatment
Type of cutting Roll-formed and length-set profile cutting.

rolling shutter slats steel door making machine
Our main products: CZU purlin roll forming machine, deck floor roll forming machine,door series roll forming machine, cable tray roll forming machine, roof and wall roll forming machine, light steel roll forming machine, water channel roll forming machine, glazed tile /ridge cap roll forming machine, highway guardrail roll forming machine, sandwich panel roll forming line, rack and fence roll forming machine and auxiliary equipments.

Leave a Reply

Your email address will not be published. Required fields are marked *