Roll Forming Machine for Two Waves Road and Highway

Roll Forming Machine for Two Waves Road and Highway

Highway Guardrail Roll Forming Machine

  • Brief Introduction:
  •  Production Drawing: (as per the final drawing)

  • Product size can also be custom-made according to customer’s requirement.
  • Parameters of the raw material:
Material Thickness Width I.D. Max. O.D. Yield strength Max. coil weight
Galvanized steel 2-4mm 510,780mm Ф508 mm
Ф610 mm
Ф1500 mm 350 Mpa 5T
10T

 

  • Main Technical conditions of the production line:
  • Temperature:                   -15ºC~40ºC
  • Voltage                       380/480V± 10%, 50/60 HZ, 3 P
  • Air pressure:                    0.6~1.2 Mpa
  • Total gas:                       200 L/min
  • Total power:                     ≈75 KW
  • roller material:                 D2,Cr12
  • Color:
Main body Protective cover Main moving parts Protective nets
RAL5015 RAL3020 RAL1016 RAL9017
  • Production capacity:                     15m/min
  • Dimension (L*W*H):                     L≈ 35m, W≈ 2 m, H≈ 2m
  • Specification of the shipping container: (The number is pre-estimated , final data should be confirmed in two weeks before delivery.)
Container 40GP 40OH 40OT 20GP 20OH 20OT
Number 3
  • Working Flow:

  • Decoiling → Leveling → Shearing & Butt-Welding → Feeding Material → Punching Hole → Pre-cutting → Roll forming → Plates to automatic stacker

  • Components List: 
No. Components Name Description Quality
Set/piece
Mark
1 Decoiler Hydraulic Decoiler 1
2 Leveling Device 5 Rolls Levelling 1
3 Shearing & Butt-Welding 1
4 Loop Device 1
5 Servo Feeding Device Drive by Servo Motor
6 Punching and pre-cutting Device Punching Hole and pre-cut the sheet to fixed length 1
7 Guide Feeding Device Vertical Roll Guide 1
8 Roll Former Individual Roller Station 1
9 Automatic stacker 1
10 Hydraulic System Dedicated System 2
11 Electric Control Section Control Production Line 1
12 Remote network system 1
13 Spare Parts 1
14 Manual of the machine 1

Leave a Reply

Your email address will not be published. Required fields are marked *