Cut to length line

The cut to length lines can cut an entry mother strip in cross section, forming sheets that are suitably stacked in compact and square packages. It can cut the matal sheet according to the customzied length. Let’s show some information about the machine in the following.

Take the picture of cut to length line for your reference

cut to length line

Working Flow of the cut to length line

Decoiling →Feeding guide→ Cut to length→ Supporting table

The advantage of cut to length line

1.Safe and ergonomic operation, also for the thickest and hardest strips.

2.High productivity by minimizing down times by means of automatic changes of leveler rolls, shear knives and non-stop alternative stacking in up to four different stacking stations.

3.Efficient elimination of strip internal stresses by high capacity levellers resulting in high plastification rates (>80%), so covering wider thickness range than competitors.

4.Dual cassette levellers with automatic cassette change in less than ten minutes.

5.Eccentric rotary shears for cutting of parallelograms of adjustable 30º degrees angle and maximum 8 mm thickness.

6.Our own vacuum or magnetic stackers working with the start-stop principle (zero inertia) for protection of sheet edges and surface during high speed piling.

7.Possibility of multi-stacking feature for short and narrow blanks at high speed.

8.Exit packaging lines for the finished packages from manual solutions to fully automatic solutions.

A video of cut to length line

If you want to know more detail information about the machine, please feel free to contact with us. We can customize the machine according to your requirements.

Leave a Reply

Your email address will not be published. Required fields are marked *