Two waves highway guardrail machine

Two waves highway guardrail machine can produce different size of 2 waves guard rail which used for highway or other livestock farms. The finished products are used as a variety of guardrail, highway guardrail, fence and other livestock farms.

Take a drawing profile of two waves highway guardrail for your check

two waves highway guardrail

Steel Guardrail Roll Forming Machine

Procedures of the two waves highway guardrail machine

It is fully automatically from the feeding to run out table, it is labor saving and eazy to operate.

Hydraulic uncoiler—Feeding—Leveling– hydraulic punching—Roll forming—Hydraulic cutting—output table

Main specifications of two waves highway guardrail machine

  1. Main motor power: 18.5kw
  2. Punching: Hydraulic pre-punching before forming,
  3. Punching mould:Cr12mov,quenched 58°~62°
  4. Roller material:Gcr15 bearing steel and quench treatment hardness 58°~62°, chrome coated 0.05mm
  5. Leveling rollers: 7rollers(three upper and four lower)
  6. Roll forming station: 21 groups
  7. Diameter of main shaft: 100mm
  8. Drive: Gearbox
  9. Raw material: galvanized steel
  10. Thickness of Raw material: 2.0-4.0mm
  11. Working speed: 8m–15m/min(Exclude cutting time)
  12. Length Tolerance: ±2mm
  13. Cutting: Hydraulic cutting after forming, Auto cutting when reach the set length.
  14. Cutting blade: Cr12mov
  15. Cutting tolerance: +/- 1.5mm
  16. Hydraulic power: 7.5KW
  17. Hydraulic pressure: 30Mpa
  18. Weight of machine: about 20ton
  19. Size of machine: About 13000×2000×1500mm L x W x H
  20. Color of machine: depend on customer
  21. Coder: Omron
  22. Control: PLC Panasonic, made in Japan. 380V 50HZ
  23. Computer operating panel: touching screen

two waves highway guardrail machine

 

Leave a Reply

Your email address will not be published. Required fields are marked *