Roller shutter door roll forming machine

The roller shutter door slat roll forming machine is a simple and flexible production line manufacture of various kinds of metal shutter slat profile for metal door industry.

The roller shutter door slat roll forming machine is available to produce different kinds of roller shutter slat profile in cutomer design, there are many kinds of roller shutter door slats, such as the flat slat, curved slat, perforated slat. For different product volume requirements, a flying-cut and double end decoiler also can be integrated. For perforated slats, a high speed coil punching line is available in-line or out-line operation.

Check some profiles of roller shutter door slat

roller shutter door slat

Parameters of roller shutter door slat roll forming machine

Working  efficiency with punching 12 m/min
Thickness of Material 0.8 to 0.8 mm
Control system PLC
Uncoiler system 3 Ton manual expansion
Forming by rolling Roll 14 Roller station
Roller material Gcr15 quenched
Shaft and the diameter of axle 45#Aluminium processing  diameter of axle=¢50mm
Main part power 4 kw
Hydraulic motor power 3kw
Hydraulic pressure 20Mpa
Scissor material Gcr12MoV quenched
length tolerance ±1.0mm
voltage 380V, 50HZ,3 phase
Driving Method Chain

roller shutter door salt roll forming machine

Features of struct channel roll forming machine

1. material with galvanised steel, pre-painted steel or aluminum thickness from 0.8-1.2 mm
2. production speed of struct channel roll forming machine is 20-25 m/min
3. automatic “hands-free”, PLC control system with touch screen
4. cut to any length by setting on touch screen in PLC system
5. stationary hydraulic cut off make accurate and clear cut
6.in-line punching press is equipped for hole slooting
7. option with flying shear to maximum product output
8. option with multi-profile roll tooling designing for product size changeover
9. option with auto-stacker to minimize operator cost

Leave a Reply

Your email address will not be published. Required fields are marked *