C-shaped steel production line equipment Promise forming Shear

C-shaped steel production line equipment Promise forming Shear

product information:
1, automatic C-beam equipment technical parameters:
Equipment size: 9000 * 1200 * 1400mm;
Weight: 8.5t;
Motor power: 18.5kw;
Effective sheet width: 80-300mm;
Waist high: 30-80mm;
Feed thickness: 1.0-3.0mm;
Discharge speed: 8-25m / min without punching shear;
Forming passes: 13 + 4;
Feed Material: Q195 / Q235 hot rolled strip;
Forming roller: GCr15 bearing steel finishing and heat treatment of hard chrome plating Houla Si polishing;
Forming rollers: 40Cr finishing after quenching hard chrome plating;
Both sides of the wall: A3 board:

Cutter Material: Cr12 heat treatment.

C-shaped steel production line equipment Promise forming Shear
2, set up with:
Coil arm put a rack;
Feed roller leveling one;
Hydraulic punching set, automatic control horizontal and vertical pitch;
Promise forming a hydraulic shear;
Forming host one;
PLC touch screen computer control cabinet, one Taiwan;
Finished a tray rack;
A toolbox;
Use a manual.
3, automatic C-beam equipment package delivery:
Service: one year warranty;
Packing: Simple packaging factory protective film;
Delivery time: 60 days.
4, automatic C-beam device functions:
C steel automatic stepless shear device is a roll to produce a variety of specifications C purlin roll forming machine finished single. C steel equipment mainly by passive loading rack, leveling device, punching device, forming Promise shearing device, hydraulic station, computer control systems.
Automatic C-beam machine, one minute to achieve C80-300mm any quick change type, you need to achieve the type of product specifications change, shaping cutter can be achieved either C80-300 Model Promise cut without changing tools. Inlet automatic adjustment, cut to length, precision accuracy, pressure-type speed, every minute of the board 8-25m / min, saving labor costs and improve productivity

Purlins C and Z and Lipped Angle Roll former

Purlins C and Z and Lipped Angle Roll former

The structural C and Z purlins are for industrial buildings, garages, verandahs, and carports; anywhere that strong reliable steel framing is required. Manufactured from quality galvanised steel, this is a fully integrated system allowing for flexible design options.
Supplied plain or punched, galvanised purlins are manufactured from high tensile steel for increased strength, reduced weight and a long serviceable life.
The Samco Purlinmaster™ is the best choice in rollforming machines for the U-Channel, Lipped Channel, Sigma Purlins, and Z-shaped profiles (CEE Purlin and ZEE Purlin).
Today’s equipment and tooling offers a rapid change rollformer for allowing the operator to select a flange height change in minutes and not hours.
The web width change in an infinite range from 100mm up to 400mm.
Our equipment is made to produce purlin in pre-painted, in galvanized and also the use of Hot Rolled steel.
Every line can be loaded with coil entry equipment, including uncoilers, as well as a wide range of hole punching systems for inline web and flange hole placement with high accuracy.

Purlins C and Z and Lipped Angle Roll former
The automation of gapping the roll tooling for different thicknesses can be added so that your operator does not have to adjust the top shaft for material thickness changes.

We also have Broken C Purlines roll forming machine and C & U & Z purline machine  and so one

If you want to know more information about Purlins C and Z and Lipped Angle Roll former  , you also can contact us with Email  roofingmachine@zhongtuocn.com

roll forming machine manufacture

roll forming machine manufacture

We are the roll forming machine manufacturey factory. We have the steel roll forming machine . keel roll forming machine and so on.

We are main product is the cold roll forming machine.

My factory building in 1996 we have exported to more than 30 contries. We are developing various cold roll forming machines for roof tiles making, ceiling metal frame and welding pipe machine, which are used in the following areas like construction industry, automotive industry, packing industry.

Our company has got CE authentication and international quality,system management ISO 9001:2000 authentication. Our main,products are about cold roll forming machines like Metal stud and,track roll forming machine for ceiling or wall pacification, Roof panel machine, Light Steel forming machine, shutter door roll forming machine, downpipe roll forming machine and others.

The roll forming machine manufacture need the best cold roll forming machine,It need the Professional designers to design the shape of roller and molding line number.

 Our machine:

1).Stable Fixed Structure and automatic control, easy to operate.
2).1 person can operate 2 sets of this Tube Mill.
3).Various types for your choose,OD:6-219mm, TH:0.2-6.0mm.
4).this machine not only can produce round pipe, but also can produce the square pipe, rectangle pipe, abnormal pipe(only change the mould / rolls in Turkish head).
5).The finished pipe are flexible and can be bended or pressed into different shapes without damages.

If you want to know this roll forming machine fanufacture you can contact us with Email   roofingmachine@zhongtuocn.com

Vertical cutting punching machine

Vertical cutting punching machine

Light steel keel machine equipment can produce a variety of finished purlin roll forming a single unit, mainly by the screed, passive loading rack, cutting device after forming, punching, hydraulic station, computer control systems and other components. Production of light steel structure is the main material, the use of steel or steel roll forming steel. Wall thickness can be produced by hot rolling method is generally difficult to produce a uniform cross-sectional shape but complex variety of profiles of different materials and cold-formed steel. The product is made of C-shaped steel finished with good bending pressure performance good flatness, automatic punching, high degree of automation, automatic fixed-length cutting, quick and easy installation, it can be used as the main medium-sized industrial civil buildings by the force structure , such as factories, warehouses, theaters, stadiums, hangars, exhibition halls, fairs trellis roof load and load-bearing wall flat support

 

C steel machine machinery manufacturing craftsmanship lead

C steel machine machinery manufacturing craftsmanship lead

C-beam welding ball node production and test solder balls formed with hot and cold are two ways, the current production of hot-rolled ball more. Detailed steps are as follows: a circular plate material under; hot rolling hemisphere; machining; welding assembly. Produced by hot rolling ball prone to uneven uniform wall thickness, “a tumor” and “flouncing” etc., tile press regulations wall thickness uneven degree of the limit. The ball does not allow “a tumor”, “flouncing” should be removed during trimming.
C steel ball roundness (ie the difference between the minimum diameter and maximum diameter), not only affects the size of the assembly, and will cause the node eccentric, it should be within a certain range of grip. Because the rolling die and wear compression ratio discretion insufficient cooling causes, often renders the finished diameter of the ball is too small, and this situation is likely to cause a total grid size is too small to fight. Thus, the grid diameter deviation procedures for the ball but also understand the constraints.

c steel roll forming machine
Bolt ball manufacturing: bolt-rough machining in two ways, one for forging, one for forging. Casting ball prone to cracks, blisters; forging ball good quality, high efficiency, low cost. C-shaped steel rolling machine equipment of C-beam machine finished there is a good bending press can be good flatness, automatic fixed-length cutting, punching initiative, high level of automation, efficient and convenient device, the product can be used as medium and large civil construction industry the main load-bearing structure, such as factories, machines garages, hangars, exhibition halls, theaters, fairs trellis roof load bearing wall with the flat support.

Ceiling light steel keel machine

Ceiling light steel keel machine

Ceiling light steel keel machine as a building material, is now very popular, use it renovated ceiling stylish, personalized and safe. Strut channels resulting in product demand, which is light steel keel machine born on the application.
Light steel keel machine main technical parameters
1. Size: 4000 * 800 * 1500mm
2. Forming Rows: 12 molding
3. Roller material: 45 # steel temperature quenching from finishing
4. Motor power: 2.2kw 3 with planetary cycloid reducer
5. Productivity: 10-17m / min
6. Control means: equipped with automatic computer control system, to complete forming, cutting, feeding and other steps on their own
7. Unit comprising: forming host, a feeder, a shearing device, a catcher, a control cabinet.

Light steel keel machine
Ceiling light steel keel machine as a building material, is now very popular, use it renovated ceiling stylish, personalized and safe. Strut channels resulting in product demand, which is light steel keel machine born on the application.
Light steel keel machine is a strip of material, by continuous cold roll forming. Production of complex cross-section profiles (products: light steel keel, paint keel, keel card, all kinds of construction profiles, steel, steel-lined door profiles, high-speed Hulan, etc.) and based on customer requirements planning, manufacturing different specifications of cold-formed , paint unit equipment.
In the light steel keel machine before starting operations check up after the machine during operation, must be strictly controlled during operation, the temperature of the machine and operating conditions, is not an unstable situation, is not a grinding machine is not there will be a strong voice, if it exists, would hurry down to check, in the light steel keel machine running for some time and used for a period of time to perform routine lubrication and hygiene, and ensure clean operation of the machine light of its aging parts must be promptly replaced.

If you have the High speed light keel roll forming machine  and Trangular light keel machine 

You also can contact us with email   roofingmachine@zhongtuocn.com

 

Flying saw punching Z-beam machine

Flying saw punching Z-beam machine

Description: Z purlin Z-beam steel tile equipment has good bending compression resistance, good flatness, automatic fixed-length cutting, automatic punching, high degree of automation, quick and easy installation. Products can be used as the main medium-sized industrial civil buildings by the force structure, such as plant
Z purlin Z-beam steel tile equipment has good bending compression resistance, good flatness, automatic fixed-length cutting, automatic punching, high degree of automation, quick and easy installation. Products can be used as the main medium-sized industrial civil buildings by the force structures, such as factories, warehouses, machine garages, hangars, exhibition halls, theaters, stadiums, fairs trellis roof load and load-bearing wall support
Z-beam steel tile equipment consists of a passive material rack, put the rack base, screed, forming the host, punching device, forming cutting device, hydraulic station, computer control cabinet composed of several parts.
Steel tile equipment products can be used as the main medium-sized industrial civil buildings by the force structures, such as factories, warehouses, machine garages, hangars, exhibition halls, theaters, stadiums, fairs trellis roof load and load-bearing wall support .
A detailed parameters
Host: 10000mm * 2000mm * 1000mm
Total length of the pipeline; 17-20m
Rolling: Width 150-300mm, 50-70mm height
Rolling Thickness: 3.5mm or less
Second, the abrasive material roll
Cr12 steel quenching hardness: 55 ° -60 °
Quality shaft: 45 # Diameter: ∮80mm
Third, Productivity: 8-10m / min

 

Metal frame surface treatment method

Metal frame surface treatment method

Strut channels ceiling materials is a common, easy to install, the quality of light, disassembly is relatively easy, so popular. We usually see the products are surface-treated, purpose of doing so is to rust and corrosion, so, what are the specific way to do that, let the light steel keel equipment manufacturers to let you know it.

IMG_0082
Strut channels because of the use of the environment, it accordingly antiseptic and fireproof treatment is necessary. The first method is spraying, this method is relatively simple, we ourselves can operate as long as the tools to prepare and spray material, you can make embalming fluid, can also be a fire spray, spray the product that is repeated can. Of course, not to say that the spray thicker the better, too thick will increase the weight, it is not good. Another way is to soak this method is generally not suitable for home use or construction units, operations are carried out metal frame manufacturers, products are available on the market after this treatment.
No matter what kind of surface treatment, metal frame are need maintenance, not surface-treated can be absolutely guaranteed not to rust and corrosion, light steel keel equipment manufacturers says

If you want to know more information about high speed light keel roll forming machine

and you also can contact us with Email   roofingmachine@zhongtuocn.com

Hydraulic guide pin 1080 single roll formingmachine

Hydraulic guide pin 1080 single roll formingmachine

Description: The main technical parameters 1. passive discharge: Manual up tight, passive discharge 2. Place rack loading: 4T 3. Rack: Using 300H steel welding 4. Forming Machine-oriented feed rack form: lateral roller 5 forming machine form: 1 2 mm wall-type chain drive 6. shaft diameter: ¢ 70 mm solid shaft
This station 1080 Color tile press guide column hydraulic shears, cut before the slide is more durable than the phenomenon does not appear helpless, prolonged use is not prone to failure, than for the production of larger customers use.

IMG_0620
The main technical parameters
1. Passive discharge: Manual up tight, passive discharge
2. Place rack loading: 4T
3. Rack: Using 300H steel welding
4. Forming Machine-oriented feed rack form: lateral roller
5. The machine forms: 12mm wall-type chain drive
6. The shaft diameter: ¢ 70 mm solid shaft
7. Chain: 0.6 inch single row
8. Forming Motor Power: 3KW reducer
9. The machine line speed: 8-10m / min
10. Machine Road Number: 11
11. Roll Material: high quality 45 # steel forging playing pieces
12. Hydraulic station motor: 3kw
13. Hydraulic Pump Station: Gear Pump
14. The cutting mode: hydraulic cutting guide post
15. Scissors sheet molding material: Cr12
16. The shearing blade heat treatment: HRC58 ° -60 °
17. Rolling Thickness: 0.3-0.8mm
18. Expand the material width: 1200mm
19. Length Length accuracy: ± 2mm
20. The computer uses PLC computer operation

If you want to know more information you can contact us with email    roofingmachine@zhongtuocn.com

Light steel keel machine equipment

Light steel keel machine equipment

Strut channels keel machine equipment consists of the following equipment components: hydraulic uncoiler, five roll leveler shear welder servo feeder length measurement, utility hydraulic punching machine roll forming machine flying shear, out-feed conveyor cooling rack system, electrical system and other
A detailed description:
Light steel keel machine production of light steel keel paint keel compared with its surface, painted surface will not do some processing, but also in the appearance of the structure can be designed to produce a V-type, C-type, T-type, L-shaped keel. Our machine can produce light steel keel keel cut to specification Q50, Q75 and Q100, the main specifications into the ceiling joists D38, D45, D50 and D60. On its appearance process requirements produced by the keel shape to be smooth, clear edges and corners, the incision is not residual burrs or deformation of the surface of the galvanized layer requirements are not allowed to emerge from the skin, from tumors and other defects, ensure that the products of the keel shape beautiful, and to be precise specifications.
Strut channels keel machine equipment consists of the following equipment components: hydraulic uncoiler, five roll leveler shear welder servo feeder length measurement, utility hydraulic punching machine roll forming machine flying shear, out-feed conveyor cooling rack system, electrical system, and the like.
Light-steel-keel-machine-equipment

Strut channels keel machine equipment has the following characteristics:
1. Process ancestors: The line produced by a continuous roll after roll forming cut length is determined to intercept parts forming the shape rule length cut indeed divisive good. Shaped workpieces good appearance and high strength.
2. high productivity: the line only 2-3 people to do gymnastics, do gymnastics simple low labor intensity of the production line speed is 0-20 m / min stepless adjustable, general operating speed: 14- bender -16 m / min.
3. High reliability: The line hydraulic, pneumatic, electrical system components are imported secondary inferior good element performance stable and reliable process parameters combination of master material hot rolled steel sheet.

If you want to know more production as half automatic flat T bar roll forming machine  and Z purline roll forming machine 

You also can contact us with email  roofingmachine@zhongtuocn.com