What is the c purlin machine

C purlin is automatically formed by c purlin machine. The c purlin machine can automatically complete the forming process of C purlin according to the given C purlin size or drawing profile.

c purlin machine
The C purlin machine is a single roll forming unit that can produce a variety of C purlins. The machine is mainly composed of passive loading frame, leveling device, punching device, cutting device after forming, hydraulic station, computer control system and so on. This machine adopts automatic flying saw punching and is easy to operate. C purlin products rolled by C purlin equipment have good tensile and bending properties, good straightness, fully automatic fixed length cutting, automatic punching, high degree of automation, quick and convenient installation, and can be used as large and medium-sized industrial and civil buildings. The main force structure, such as factory buildings, warehouses, garages, hangars, exhibition halls, theaters, stadiums, market sheds, load bearing load and wall support. Cold-formed steel is the main material for making lightweight steel structures, and is formed by cold-bending forming of steel plates or steel strips.
Applicable scope of C purlin: C purlin is widely used in purlins and wall beams of steel structure buildings, and can also be combined into building components such as lightweight roof trusses and brackets. In addition, it can also be used for columns, beams and arms in mechanical light manufacturing.
C purlins are divided into dozens of specifications according to the height, such as 100, 120, 140, 160, 180, 200, 220, 250, and 300. The length can be determined according to the engineering design, but considering the conditions of transportation and installation, the full length Generally no more than 12 meters.

Half automatic interchangable CZ purlin machine

The half automatic interchangable CZ purlin machine can produce various specifications of CZ purlins by half automatic simple stepless adjustment using the same set of equipment. It is not necessary to change the forming rolls when changing specifications. The production process adopts automatic control mode, which can automatically punch, cut and form according to the input length, longitudinal hole distance and quantity.

Check the drawing profile

CZ profile

Technical parameters of half automatic interchangable CZ purlin machine

1.C/Z purlin processing specifications:
By customer shape chart (width 300, height 100)
2. Processing workpiece thickness: 1.5~3mm
3. Punching hole distance lateral adjustment range: 45~500mm
4. Board length: >3m
5. Large forming speed of C-type purlin: 20m/min
6. Installation form: using the arch type
7. Roller form: using two-side rollerway split type
8. Roll material: GCr15 steel quenching treatment
9. Spindle material: 45 steel quenching and tempering treatment
10. The main motor power is about 15KW
11. Width adjustment total motor power: 3KW
12. Drive form: chain drive
13. Number of rollers: 17
14. Punching, cutting: hydraulic drive, flat punching, flat cutting
15. Cutter material: Cr12 quenching treatment
16. Electronic control system: the whole machine adopts industrial computer PLC frequency conversion control

half automatic interchangable cz purlin machine
The whole machine has beautiful appearance and high production efficiency (production speed reaches 20m/min).

C stud roll forming machine

Thin sheets of galvanized steel can be cold formed into c studs for use as a structural or non structural building material for both external and partition walls in both residential, commercial and industrial construction projects. It is popular in modern building because light weight, recyclable, costs less money and time. I will detailly introduce the c stud roll forming machine to you in the followings.

The drawing profile of c stud

profile of c stud

Coil material thickness:0.5mm–1.0mm

Coil material:Q235

The parameters of c stud roll forming machine

Manual Decoiler

1).Material coil inner diameter: 450mm-550mm

2).Max coil Width:400mm

3).Carrying capacity: 1.5T

1.5T uncoiler

Forming system

1).Roller station:11stations

2).Shaft material:45# steel,heat treated HRC 58-62.

Outer diameter:50mm

3) Roller material: GCr12MoV

4).Transport: Gear Driving

5).Forming Speed: 15-25m/min

6).Motor:5kw

7).Size of Machine: 5mx1.2mx1.5m

8).Weight:2.5T

9).Voltage:380v,50Hz,3 phase

10).Test material:Q235

11).the similar machine photo attached below.

C stud roll forming machine

Metal stud roll forming machine

Metal stud roll forming machines are the main type of machine for producing these steel framing studs. Also called stud and track rolling machines, a roll forming machine can run at high speed and produce as much metal studs as is required. Studs are shaped little by little as they move through the stations of the roll forming machine. When they reach required length they are cut off with a flying-cut off. As the studs move through the roll forming machine holes can be punched at required intervals. I will detailly introduce the metal stud roll forming machine for you.

The drawing profile of metal stud

metal stud profile

Coil material thickness:0.61mm

Need seeds

Material:PPGI,GI

The parameters of metal stud roll forming machine

Studs are shaped little by little as they move through the stations of the roll former. When they reach required length they are cut off with a flying-cut off. As the studs move through the roll former holes can be punched at required intervals.

Manual Decoiler

1).Material coil inner diameter: 450mm-550mm

2).Max coil Width:400mm

3).Carrying capacity: 1.5T

1.5T uncoiler

Forming system

1).Roller station:10stations

2).Shaft material:45# steel

Outer diameter:40mm

Roller material: GCr12MoV

3).Transport: Gear Driving

4).Forming Speed: 25 m/min

5).Motor:3kw

6).Size of Machine: 5mx1.2mx1.45m

7).Weight:2.2T

8).Voltage:380v,50Hz,3 phase

9.The test material:PPGI,GI

The similar photo attached as follow:

metal stud roll forming machine

The video of metal stud roll forming machine

60X27 stud and 27X28 track roll forming machine

In modern society, c stud and u track are mainly used for false ceiling making and drywall making. CU keel systems are easy to handle, economical, non-combustible, high quality alternate to more traditional framing materials such as wood. Non-load bearing steel framing includes: steel studs and track. I will introduce the 60X27 stud and 27X28 track roll forming machine to you.

Check the drawing of the 60*27 stud and 27*28 track

60-27 stud and 27-28 track

Main parameters of 60X27 stud and 27X28 track roll forming machine

Manual Decoiler

1).Material coil inner diameter: 450mm-550mm

2).Max coil Width:400mm

3).Carrying capacity: 1.5T

1.5T decoiler

Forming system

1).Roller station:10stations

2).Shaft material:45# steel

Outer diameter:40mm

3) Roller material: Bearing Steel

4).Transport: Gear Driving

5).Forming Speed: 15-20m/min

6).Motor:3kw

7).Size of Machine: 5mx1.2mx1.5m

8).Voltage:380v,50Hz,3 phase

60X27 stud and 27X28 track roll forming machine

Cutting System

1).Material: blade and mold material: Cr12 steel with quenched treated 60-62℃

2).Cutting system: Advanced hydraulic drive, automatic cutting after forming, no distorting or wasting, high level safety factor.

Control system

1) Screen: touch screen

2) PLC:Taiwan Delta

3) Automatic length measurement

4) Automatic quantity measurement

5) Computer is used to control length and quantity. Machine will automatically cut to length and stop when required quantity is achieved

6) Length inaccuracy can be amended easily

Esquinero profile roll forming machine

The esquinero profile strip is a kind of profile that is used on the wall to make the corners more clean and beautiful. In addition to aesthetics, the esquinero profile strips reinforce the corners at the same time, avoiding dents and other damage in the corners. There are many types of corner bars that can be chosen according to the design of the building and personal preferences. I will introduce the metal esquinero profile and esquinero profile roll forming machine to you.

Check the drawing of esquinero profile

esquinero profile

Main parameters of esquinero profile roll forming machine

Manual decoiler

1).Material coil inner diameter: 480mm-550mm

2).Max coil width: 450mm

3).Carrying capacity: 2500kg

2.5T decoiler

Forming system

1).The materils of shaft:45#steel,outer diameter:40mm

2).Materil of the roller:SKD 11

3).Forming steps:9

4).Power of motor: 4 KW

5).Speed of the machine:15meter/minute

6).Transmission by gear

7).Dimension of the machine: 3.5 M× 1.2 M×1.4 M

8).Voltage: 380v 50hz 3phase

esquinero profile roll forming machine

Cutting system

1).Hydraulic cutting

2).Material of the cutter:Gcr12

3).Cutting system: advanced hydraulic drive, automatic cutting after forming,no distorting or wasting,high level safety factor,will not stop the machine to ensure the speed of cutting.

A video of esquinero profile roll forming machine

Drywall furring channel making machine

Drywall Furring Channel is a hat-shaped framing accessory designed to “furr” out any surface for the application of the final finish (ie. metal siding on steel studs, drywall on masonry, etc.). In addition furring channel used in conjunction with cold rolled channel is the ideal system for the construction of a drywall ceiling. To making drywall furring channel, we design the drywall furring channel making machine for you. I will detailly introduce it to you in the followings.

Drawing profile of the drywall furring channel

drywall furring channel

Main configs of drywall furring channel making machine

1).Shaft material: 45# steel,outer diameter: 50mm

2). Roller material:GCR12 MoV

3).Number of forming steps:11 steps

4). Main electrical machinery power: 5.5KW

5). Rolling speed: 20meter/minute

6).Transport:by gear

7).Voltage: 380v 50hz 3phase

drywall furring channel making machine

There is a video of this machine, please check

Steel door frame roll forming machine

Steel profile door frame roll forming machine can make various types metal door or window frames, reinforced, fire stop doors, etc. by roll forming method. The steel door frame roll forming machine is a complete product line. After roll forming by our production line, we could make very smooth and beautiful steel door frame without any scratch on surface.

A drawing profile of the stee door frame

steel door frame

Some finished product of steel door frame

steel door frame products

Main parameters of steel door frame roll forming machine

Manual decoiler

1).Material coil inner diameter: 500mm-600mm

2).Max coil width: 600mm

3).Carrying capacity: 1500kg

1.5T decoiler

Forming  system

1).Shaft material:45# steel,outer diameter:50mm

2). Roller material:CR12Mov

3).Number of forming steps:14steps

4).Main electrical machinery power: 7.5 KW

5).Forming speed: 25m/min

6).Transport:by gear

7).Voltage: 380v 50hz 3phase

steel door frame roll forming machine

Cutting system

1).Hydraulic cutter

2).Blade and mold material: Cr12 steel with quenched treated 60-62℃

3).Cutting system: advanced hydraulic drive, automatic cutting after forming,no distorting or wasting,high level safety factor,will not stop the machine to ensure the speed of cutting.

CU prulin making machine

As the main force part in the construction, our CU purlin making machine can make different sizes CU purlin for you. This CU Purlin making machine,  can produce C shape and U shape purlins from 100-400mm of width and easily to change  spacers. Maximum thickness can be formed at 1.5-3mm. Also we can design this machine  to  work with any width of the purlins and main channels, automatically adjustable by PLC control or adjust handle wheel to change the sheet width.

The drawings of CU purlins

CU purlin profile

Main components of CU purlin making machine

Hydraulic uncoiler

1). Inside diameter coil is 450 – 550mm

2). Coil Width is 600 mm

3). Capacity:5 ton

5). Hydraulic expansion

6).Automatically feeding

7). Hydraulic, inner tight

8).Hydraulic power: 3 kw

hydraulic decoiler with car

Main forming system

1).Roller station:12 steps

2). Roller material:GCR12 Mov

3) .Shaft material:45# steel,Outer diameter: 80mm

4) .Transport:Transport by Gear

5).Forming speed: 8-10m/min

6) .Motor:22kw

7).With yellow safety guards

8) .Voltage: 415v 50hz 3phase

CU purlin making machine

Cutting system

1).Blade and mold material: Cr12 steel with quenched treatment

2).Cutting system:advanced hydraulic drive, automatic cutting

Control system

PLC control

Hydraulic system

1). Advanced hydraulic system

2). Power:7.5kw

Punching

Punching hole as drawing

Warranty

1).One year, and we will provide the technical support for the whole life.

2).Training: the buyer should charge of visa, return ticket, food and accommodation overseas and USD100/person/day for salary.

 

Keel steel roll forming machine

Keel steel roll forming machine with a small dimension, easy to transport. The speed can be up to 60m/min. With the transmission, so the working will be more stable. We can also supply the customized machines. The finished products are widely used in decoration, interior decoration, etc.

Take some drawing profile of keel steel

keel/truss keel

Process Flow of Keel Steel Roll Forming Machine

Uncoiler —- Feeding — Leveling —Roll Forming  — Punching — Cutting — Run Out Table

Parameters of keel steel roll forming machine

Size: 5500х1200х1400Weight t: 2.4 tons

Voltage:380V/50HZ3Phase(as customer’s request)

Roller fixer : Guide column

Frame : Memorial arch frame type

Frame thickness:25mm

Drive mode: gear

Material of rollers: GCr12MoV

Material of shafts: 45# steel with tempering

Diameter of shafts: φ50mm

Number of rollers :12 rollers

Main power: 7.5kw
Cycloidal planetary gear speed reducer

keel/truss steel roll forming machine

Advantages and features:

1) Installation is quick: the light weight composite panels, installation and splicing can be arbitrarily cutting characteristics, determine its simple installation, can greatly improve efficiency, save construction period.

2) High strength: high strength steel for the substrate (tensile tensile strength 5600KG / CM) coupled with the most advanced design and roll forming, with excellent structural properties.

If you want to know more detail information about the keel/truss steel roll forming machine, please feel free to contact with us at any time. We also have other roll forming machines, you can contact with us directly if you have the requirements.