Metal door frame roll forming machine

Metal door frame roll forming machine is a production line to make metal door frame. We can customize the machine according to your requirements. In the following, i will show you some information about a metal door frame machine we made before.

Take a drawing profile for your reference

door frame profile

The working flow of the metal door frame roll forming machine

working flow of door frame machine

Parameters of the metal door frame roll forming machine

1 Coil width According the profile
2 Rolling Speed 10-15m/min
3 Material Thickness 0.8-1.2mm
4 Control System PLC  (Delta)
5 Un Coiler 1.5T manual decoiler
6 Roller Stations About 15 stations (according the final design)
7 Roller Material 45# steel
8 Shaft Material 45# steel
9 cutting Hydraulic cutting
10 Maim Motor Power 5.5kw
11 Hydraulic Station Power 3kw
12 Hydraulic Pressure 12-16Mpa adjustable
13 Material Of Cutter Cr12Mov quenching 58-62℃
14 Machine structure Middle plate
15 Electric Source 380V, 50HZ,3 phase

According to customer’s require

16 Way Of Drive By chain

metal door frame roll forming machine door frame roll forming machine

Our metal door frame roll forming machines can be customized as per customer requirement based. These door frame roll forming machine are mostly known for its stability and superiority. Our Door Frame Roll Forming Machines can be availed at best competitive rates. If you want it, please feel free to contact with us.

C section roll forming machine

C sections are made from galvanized steel and can be used in conjunction with Z purlins and side rails for the same building. C sections can be used as an alternative to side rails, sitting on cleats between columns or on the face with the same section size as a Z purlin, they can cover bays up to 9M in length. They also have enough strength that they do not always require side rail supports or diagonal wires ties. The flat sections makes a C Section perfect for above doors / windows or a door frame.

Here is the drawing profile of c section

c sectionc purlin construction

A building with a brickwork base requires a closing section that can be easily fixed to without leaving a cavity. C Section is perfect for sitting on top of the bricks and blocks offering a solid base to build from. There are some detail parameters of the c section roll forming machine for your reference.

Forming steps: 16 rollers

Shaft diameter: 90 mm

Design type: Middle plate welded

Machine frame: 400# H steel welded

Roller material: Gcr12 steel

Shaft material: 40 CR

Working speed: 15 m/min

Transport: by chain

Power of main machine: 18.5 kw

Type of cutting: hydraulic

Cutter: Cr12

Working pressure: 20 Mpa

c section roll forming machinec section machine

C purlin machine

With the adoption of PLC control mode and AC variable-frequency speed regulation technology, our C purlin machine is high efficient for continuous producing purlines. Its raw materials are coiled steel sheets and its main components are decoiler, guiding system, leveling system, pre-cutting system, roll forming system, electric controlling system,hydraulic system, and bracket.

Some pictures of the c purlin machine

c purlin profilec shaped section channels roll forming machine

Features of C purlin machine

1. This machine is made up of welded steel. It uses processing technology to protect its integrity.
2. It has rational structure, strong carrying ability, and stable performance.
3. This machine has high forming precision and long service life because it undergoes high precision processing and heat treatment before chromeplate.
4. Components from famous brands ensure the whole performance and quality of our machines.
5. The C purlin machine can be operated by workers without special training because of its PLC control mode.
6. Easy to debug, low noise and high efficient.

Parameters of c purlin machine

Forming station 14 stations
Forming Rollers GCr15, heat treatment and hard chrome-plated ,HRC55-58
Main shaft material S45C, heat treatment HRC42Φ80mm
Leveling roller 5 rollers
Cutting sheet Cutting after forming, stop to cutting
Forming speed 0-18m/min
Producing speed 0-12m/min
Main motor power 15KW,Chinese famous brand
Transmission system 1.0 double line chains
Control system PLC Siemens brand
Dimension(L×W×H) Approx.10000×1400×1600 mm
Weight Approx.9500kg

Ceiling T-bar

Ceiling T bar are made of galvanized steel and color steel. It has three items: main T-bar, middle cross T-bar and wall angle. This production

can be made of different size which is according to different size of ceiling board. Ceiling T grids has many advantages, include: beauty, good strength, cauterization-resistance, and water resistance.

dawing of ceiling t-barceiling t-bar

Available Models and Specification of Ceiling T bar:

1) the length: 3600 mm, 1200 mm, 600 mm, 3000 mm

2) the width: 24 mm, 22 mm, 21 mm, 20 mm, 18 mm

3) The thickness: 0.27 mm, 0.3 mm, 0.40 mm

4) The height: 38 mm, 32 mm

5) Shape: narrow-edge, wide-edge, plain-edge or concave trough line.

6) Installation: to fix mineral fiber ceiling board & PVC laminated gypsum board

7) Specification (mm):



Main T-bar



Middle cross T-bar


Small cross T-bar


Wall angle


Feature of Ceiling T bar:

1) This type of T grids looks more elegant in style and beauty

2) Good strength, high quality

3) cauterization-resistance, water resistance

4) Rustproof, fire resistance, stainless,

rust resistance and convenient application.

5) High Quality Material, Moisture proof,

anti-corrosive, non-deforming, fadeless.

6) High precision, high symmetry, high close fitting.

7) Strong bearing capacity

8) Safe, firm and easy to match with all kinds of mineral fiber board, aluminum ceiling and gypsum board.


mainly used as suspended ceiling of super class buildings such as guesthouse, restaurant, theater, cinema, auditoriums, office building hotels, restaurants, shopping malls theaters, danceries, stations, sitting rooms, business buildings, electronic workshops, precision apparatus rooms and industrial or residential buildings.

If you want to know more details about the ceiling T-bar roll forming machines, please feel free to cotact with us at any time.

Light steel keel

Light steel keel has more usage in modern construction. Ceiling channel and drywall channel, made of high- quality Snowflakes Steel,

adopting laminose strut channel by Cold-formed Technology,  are a kind of metal framework made after several continuous rolling.

Ceiling keel and wall channel has light-weight, high-intensity, good-antisepsis and other advantages.

They mainly match to paperbacked plasterboard and other goods, also the other plates such as GRC, FT and so on.

light steel keel

metal stud and track

Main data

1.Zinc Galvanized&Snowflakes

2.High quality hot-dipped galvanized steel coil used

3.For ceiling and wall partition


5.Length:3m in common size

6.Color:Silver white

7.Shap:U and C shap

8.Used with paper faced gypsum board or other products

Advantages and Features of light steel keel

1.Light,good strength,cauterization resistance and water resistance

2.Matching magnesium fire-proof board,gypsum board and many other wall and ceiling board

3.Moisure-proof ,shock-resistant,high-effcient and environmentally-friendly

4.Easy and fast for installation,time-saving

5. Prompt delivery, high quality ,competitive price and complete sets of styles

6.We can supply you the products based on your specific requirements

Mark and specification of the ceiling keel

Product name Item no. Specification(mm) Thickness and Length
Covering channel DC60




can be provided by customer’s request
Supporting channel DU60







Mark and specification of the wall keel

Product name Item no. specification(mm) Thickness and Length
Horizontal channel QU1 50*40*0.60




can be provided by customer’s request
Vertical channel CU1 50*45*0.60





Pallet racking production line

Pallet Racking is a cost effective storage system providing direct access to all pallets. It provides high capacity storage, is easily installed and adjusted, and has low equipment and capital costs. We have rich experience in making pallet racking production line, and can customize the machine according to your requirements.

pallet racking production linepallet racking roll forming machine

Our Racking & Shelving adjustable pallet racking can be constructed in single or back to back rows, the aisle widths being determined by the forklift trucks and handling equipment.

Features:factory storage metal rack, structured with pallets and beams are most widely used.

This kind of steel pallet racking is widely used together with forklifts , steel storage containers, steel pallets  and storage boxes.

1. pallet rack is designed to store pallet cargo,

It enables you to make full use of the storage space. With a wide range of optional solutions and components available, we can design special pallet racking according to your requirements.

2. pallet racking can be coupled with different specifications of pallets and containers.

3. It can coordinate with all the handling equipment and operational equipment.

4. pallet racking is manufactured in accordance with international quality standard ISO9001:2000, as well as international design standard SEMA, FEM, and AS4084,

Each level can be adjustable at 75mm per pitch and the maxmum loading is 25000kg with the maxmum length of 12 meters.

Each level loading duty is from 200kgs to 6000kgs, depending on the beam length.

Pallets made of different material with various sizes, can be used on practical stackable pallet racks.

Applications:warehouse & logistics, food/drug distribution, petroleum/chemical plants, automotive distributors, big box retail hardware and home improvement stores.

Metal stud and track making machine

In modern buildings, people tend to use steel because steel is lightweight, recyclable, costs less money and time, compared to traditional clays, stones or bricks. Most of building materials are made of steel, and most of these steel building materials are manufactured by roll forming machines, one of which is metal stud and track forming machine that has been designed for the continuous and automatic production of metal c stud and u tracks applied for both exterior and partition walls in both individual and industrial buildings.

metal stud and trackstud and track

Metal c stud and u tracks are great inventions in steel building projects, and that makes drywall stud and track roll forming machine, or even all the lightweight or light gauge steel frame roll forming machine highly popular in the international.  A drywall stud and track roll forming machine usually consists of manual decoiler, a feeding guide unit, a punching tool, a roll forming unit, a cutting unit, a transimission unit, a hydraulic unit, a control unit, and runout tables. Under PLC control system, this drywall stud and track roll forming machine fully automatically produces 4-6 metal c studs or u tracks out of galvanized steel of 0.4-0.6 mm thickness from punching, roll forming and cutting.

stud and track forming machinemetal stud and track making machine

Technical parameters of the metal stud and track making machine

1, Forming steps 10 rollers

2, Shaft diameter 40 mm

3 ,Middle Plate Structural

4,Roller material GCr12MoV quenching treatment 58-60°

5 ,Shaft material 40Cr steel

6 ,Work speed 0-25 meters/min

7, Gear transmission

8, Hydraulic

9,Cutting tolerance ±1mm

10,Cutter Gcr12 Gcr12

11,Working pressure 40MPA

A video of the machine for your reference

Cable tray roll forming machine

The Cable Tray Roll Forming Machine produced by us, is used for producing cable trays that are used in different kind of factories and buildings. We offering you to cable tray machine that comprise of efficient Punching Press, Hydraulic Press, Electric Control penel and many other Equipment, which make it an ideal option for many. The cable tray roll forming machine can Manufacring a both superiority and quantity cable trays in less time.

Two pictures of the cable tray

cable tray cable trays

Parameters of cable tray roll forming machine

Material thickness: 1.0-2.0 mm

Roll station: 16 stations

Motor power: 18.5+5.5 kw

Productivity: 3-6 m/min

Decoiler capacity: 5Tons

PLC brand: Delta or customized

Cutting type: automatic hydraulic

Hole punching is available

Some pictures of the cable tray roll forming machine

cable tray machine roll forming machinecable tray making machine

Features of cable tray roll forming machine

  1. material with galvanized steel thickness ranging from 1-2 mm
  2. automatic speed of cable tray roll forming machine is 3-6 m/min
  3. in-line hydraulic power press equipped for the hole punching
  4. stationary hydraulic cut off make accrate and clear cut
  5. option with telescope shaft design for rapid product size changeover
  6. option with duplex roll tooling design for different profile changeover
  7. option with auto stacker to minimize operator cost

If you want to know more, just contact with us at any time.


Z purlin roll forming machine

Z purlin roll forming machine works in the same principle as a c purlin roll forming machine does for producing steel purlins for metal building systems, only the purlins’ shapes make difference.

Z steel purlins can be used for a variety of applications, but 90% for steel structural building system, and 10% for other usages (some people use z steel purlins as the supporting clip inside sandwich panels, while some others put z steel purlins on a samples racks etc).

z purlin drawingz purlin products

Brief data of the z purlin roll forming machine

Like c purlin roll forming machine, z steel purlin roll formers also is designed to produce the section channels of different sizes, but the change to make a different size z purlin is manual. Clients need to manually change the spacers installed between rolling tools, as well as the cutting dies.

Forming stations:20

Roller material: GCr15,heat treatment and hard chromer-plated, HRC55-58

Shaft material: S45C, heat treatment HRC42 with diameter is 80 mm

Punching hole: before forming

Forming speed: 18 m/min

Main motor power: 15 kw

Control system: PLC

z purlin roll forming machine

This type z purlin roll forming mahcine is suitable for the following situations

1. Production rate is high

2. Your country worker salary is high

3. You need the fully automatic Z purlin roll forming machine

4. Save the cost of professional workers to adjust machine

5. Save the workers cost of running machine

6. Save time of changing sizes

7. long time to use machine

8. You need gearbox as machine transmission method

9. You need to change the sizes within 5 minutes

10. You need machine usage time is around 10 years or more

C shaped section channels roll forming machine

C shaped section channels roll forming machine is an equipment that produces C shaped steel channels continuously out of galvanized or cold rolled steel strips from feeding, punching for holes, bending and cutting.

Nowadays, people developed stone or concrete purlins which were strong enough to hold a house for long time. However, the builders and house owners find that the owners have to spend much more money than using wood purlins; and that the builders must spend much more time than using wooden purlins. Therefore, entering into modern ages, the stone or concrete purlins becomes the last choice for industrial or some individual buildings.

Compared to traditional purlins, steel purlins have so many advantages, they are light, easy to install, and recyclable for other buildings etc. Therefore, as we can see, in mordern steel industrial buildings or prefab enineered buildings, people always use C purlinsZ purlins and sometime U purlins without flange stiffeners as well.

c purlin profilec purlin construction

Brief details of c shaped section channels roll forming machine

Forming steps: 16 rollers

Shaft diameter: 90 mm

Design type: Middle plate welded

Machine frame: 400#H steel welded

Roller material: Gcr12 steel

Shaft material: 40CR

Working speed: 15 m/min

Transport: China

Power of main machine: 18.5 kw

Type of cutting: hydraulic

Cutter: Gcr12

c shaped section channels roll forming machine