Stud/pop chanel rack roll framing machine

Steel stud made by this stud/pop chanel rack roll framing machine are suitable to use as building decorations, especially suitable to use in bedroom, kitchen, washroom, corridor and so on. There are some details in the followings for your reference.

Drawing profile 

profile of c stud

Parameters of stud/pop chanel rack roll framing machine

1, Forming steps 10

2, Shaft diameter 40 mm

3 ,Middle Plate Structural

4,Roller material GCr12MoV quenching treatment 58-60° GCr12MoV quenching treatment 58-60°

5 ,Shaft material 40Cr steel

6 ,Work speed 0-25 meters/min

7, Gear transmission Gear transmission

8, Hydraulic Hydraulic

9,Cutting tolerance ±1mm

10,Cutter Gcr12

metal c stud machine studpop chanel rack roll framing machine

Features of stud/pop chanel rack roll framing machine

1. The frame of this machine adopts formed steel construction and utilizes processing technology after welded.
2. This machine has rational structure, strong carrying ability, and stable performance.
3. This machine has high forming precision and long service life because of its high precision processing and heat treatment before chromeplate.
4. Its famous brand components ensure its whole performance and quality.
5. With the adoption of PLC system, this machine can be operated by workers without too much training.
6. This roll forming machine for c stud is convenient to debug, and has low noise and high efficiency.

Steel stud and track wall framing machine

The steel stud and track wall framing is an economical friction-fit system to assemble frames for not only stronger, but safer partitions. In modern buildings, light-gauge steel structure play a big role because people are keen to fast assembling, economical yet safe buildings. For the steel stud and track wall framing machine, i will show you more detail information in the followings.

Check a profile and finished product of the steel stud and track wall framing

profile of Light steel keel forming machinesteel stud and track wall framing

There are many advantages of steel stud and track as following:

  1. There are over 50 years history for the commercial applications of Steel framing.
  2. Large quantities of metal components can be readily transported and craned into position on site.
  3. Drywall construction eliminates wet trades, and allows earlier finishing of walls.
  4. Steel stud lined with plasterboard offer excellent sound transmission loss properties.
  5. Rollformers steel framing has weight advantages up to 20% of equivalent size single brick rendered wall.
  6. Rollformers manufacture studs and tracks in various gauges and sizes which allows building walls up to 7.2m in height.

Parameters of the steel stud and track wall framing machine

Size: 5500х1200х1400

Weight t: 2.4 tons

Voltage:380V/50HZ3Phase(as customer’s request)

Roller fixer : Guide column

Frame : Memorial arch frame type

Frame thickness:25mm

Drive mode: gear

Material of rollers: GCr12MoV

Material of shafts: 45# steel with tempering

Diameter of shafts: φ50mm

Number of rollers :12 rollers

Main power: 7.5kw
Cycloidal planetary gear speed reducer

steel stud and track wall framing machine

Integrated ceiling keel machine

Integrated ceiling keel  machine can make light steel keel that is a kind of frame used to support the shape and fixed structure. The keel is the skeleton and substrate of the home decoration. It is very common to use and can be designed according to the buyer’s sample or drawings.

Some drawing profiles of integrated ceiling keel

profile of Light steel keel forming machine

integrated ceiling keel

Several simple installation methods for the integrated ceiling keel machine:

1. Adopt C-type light steel keel without additional load. This is mainly the main keel of the single-layer structure. Generally, we will link it with a boom or a light hanger, and the lower end will hook the sides of the C-shaped keel.
2. The T-shaped main keel is a lightweight suspended ceiling. We generally use the matching T-shaped keel hanging piece. The upper hanging rod is not connected, and the lower part is clamped with the T-shaped keel hanging piece. Some of them are galvanized iron wire hanging rods passing through the keel. The eyelet hooks are tied and tied.
3. For the keel carrying the load with additional load, the keel hanging piece and the ferrule part of the lower end of the steel bar can be used to link and tighten the nut.
The interface of the light steel keel production equipment is fixed by the T-shaped keel connector, and the secondary keel and the main keel are plugged and connected, and no accessories are needed. If the ceiling has additional load or a large ceiling, U-shaped load is required. After the keel is installed, the U-shaped main keel is connected with the suspender by the U-shaped keel (main keel) hanging piece, and the T-shaped longitudinal keel is connected with the U-shaped main keel by the T-shaped keel hanging piece.

integrated ceiling keel machine

 

Omega roll forming machine

Omega roll forming machine is for making omega channel in batch, in ceiling and drywall making. Omega channel is the weight bearing channel, so normally we will design with dotting.  This device uses a high level of color steel automatic control software, production information management. The entire unit automation control system uses a highly integrated network, automation systems and better performance.

Check the profile and finished products

omega profilehat shaped furring channel

Omega roll forming machine cutter portion is driven by a hydraulic cylinder to move up and down the tool, you can put steel cut off. Corrugated steel sheet Roll forming machine production process is as follows: steel roller into the molded part after molding to-pressure part, pressed into an equidistant one, the cutter is responsible for cutting to length.

Parameters of omega roll forming machine

Voltage:380V/50HZ3Phase(as customer’s request)

Roller fixer : Guide column
Frame : middle plate welded

Memorial arch frame type
Frame thickness:25mm

Drive mode: gear
Material of rollers: GCr12MoV

Material of shafts: 40Cr steel with tempering

Diameter of shafts: φ40mm

Number of rollers for omega :11 rollers

Main power: 3kw

omega roll forming machine

Features of omega roll forming machine

1. Heat treatment: Heat treatment for cutting frame to remove the steel stress, to avoid deformation.

2. Cutter blade: Cr12 mould steel with quenched treatment, long life time.

3. High precision: shafts for rollers are tooled by grinding machine at least twice.

Light steel keel roll forming machine

Light steel keel roll forming machine can make many drawing profiles according to your requirements. Wall thickness of the product out of the apparatus can be made very thin, but also greatly simplifies the production process, improve production efficiency.

Check some drawing profile

keel/truss keeldrywall furring channel

Features of light steel keel

1. Its own quality is lighter. Light steel keel is a lightweight material.
2, excellent fire performance.
3. The construction efficiency is high. Since the light steel keel is a lightweight material, it can be assembled by construction methods, so its construction efficiency is high.
4. The structure is safe and reliable. Because the light steel keel has excellent characteristics such as high strength and high rigidity, the structure made of it is very safe and reliable.

Parameters of light steel keel roll forming machine

Length of the main part: about 3500х800х1400

Weight of main part:3 tons

Voltage : 380V/50HZ3Phase (as customer’s request)

Roller fixer : Guide column

Frame : middle plate welded

Memorial arch frame type

Frame thickness:20mm

Drive mode: gear

Material of rollers: GCr12MoV

Material of shafts: 45# steel with tempering

Diameter of shafts: φ40mm

Number of rollers : 12 rollers

Main power: 3 kw

light steel keel roll forming machinelight steel keel machine

Features of light steel keel roll forming machine

  1. Plc control system, it is save to operate machine
  2. high efficiency and low price
  3. good performance and low production cost

C stud roll forming machine

Thin sheets of galvanized steel can be cold formed into c studs for use as a structural or non structural building material for both external and partition walls in both residential, commercial and industrial construction projects. It is popular in modern building because light weight, recyclable, costs less money and time. I will detailly introduce the c stud roll forming machine to you in the followings.

The drawing profile of c stud

profile of c stud

Coil material thickness:0.5mm–1.0mm

Coil material:Q235

The parameters of c stud roll forming machine

Manual Decoiler

1).Material coil inner diameter: 450mm-550mm

2).Max coil Width:400mm

3).Carrying capacity: 1.5T

1.5T uncoiler

Forming system

1).Roller station:11stations

2).Shaft material:45# steel,heat treated HRC 58-62.

Outer diameter:50mm

3) Roller material: GCr12MoV

4).Transport: Gear Driving

5).Forming Speed: 15-25m/min

6).Motor:5kw

7).Size of Machine: 5mx1.2mx1.5m

8).Weight:2.5T

9).Voltage:380v,50Hz,3 phase

10).Test material:Q235

11).the similar machine photo attached below.

C stud roll forming machine

Metal stud roll forming machine

Metal stud roll forming machines are the main type of machine for producing these steel framing studs. Also called stud and track rolling machines, a roll forming machine can run at high speed and produce as much metal studs as is required. Studs are shaped little by little as they move through the stations of the roll forming machine. When they reach required length they are cut off with a flying-cut off. As the studs move through the roll forming machine holes can be punched at required intervals. I will detailly introduce the metal stud roll forming machine for you.

The drawing profile of metal stud

metal stud profile

Coil material thickness:0.61mm

Need seeds

Material:PPGI,GI

The parameters of metal stud roll forming machine

Studs are shaped little by little as they move through the stations of the roll former. When they reach required length they are cut off with a flying-cut off. As the studs move through the roll former holes can be punched at required intervals.

Manual Decoiler

1).Material coil inner diameter: 450mm-550mm

2).Max coil Width:400mm

3).Carrying capacity: 1.5T

1.5T uncoiler

Forming system

1).Roller station:10stations

2).Shaft material:45# steel

Outer diameter:40mm

Roller material: GCr12MoV

3).Transport: Gear Driving

4).Forming Speed: 25 m/min

5).Motor:3kw

6).Size of Machine: 5mx1.2mx1.45m

7).Weight:2.2T

8).Voltage:380v,50Hz,3 phase

9.The test material:PPGI,GI

The similar photo attached as follow:

metal stud roll forming machine

The video of metal stud roll forming machine

60X27 stud and 27X28 track roll forming machine

In modern society, c stud and u track are mainly used for false ceiling making and drywall making. CU keel systems are easy to handle, economical, non-combustible, high quality alternate to more traditional framing materials such as wood. Non-load bearing steel framing includes: steel studs and track. I will introduce the 60X27 stud and 27X28 track roll forming machine to you.

Check the drawing of the 60*27 stud and 27*28 track

60-27 stud and 27-28 track

Main parameters of 60X27 stud and 27X28 track roll forming machine

Manual Decoiler

1).Material coil inner diameter: 450mm-550mm

2).Max coil Width:400mm

3).Carrying capacity: 1.5T

1.5T decoiler

Forming system

1).Roller station:10stations

2).Shaft material:45# steel

Outer diameter:40mm

3) Roller material: Bearing Steel

4).Transport: Gear Driving

5).Forming Speed: 15-20m/min

6).Motor:3kw

7).Size of Machine: 5mx1.2mx1.5m

8).Voltage:380v,50Hz,3 phase

60X27 stud and 27X28 track roll forming machine

Cutting System

1).Material: blade and mold material: Cr12 steel with quenched treated 60-62℃

2).Cutting system: Advanced hydraulic drive, automatic cutting after forming, no distorting or wasting, high level safety factor.

Control system

1) Screen: touch screen

2) PLC:Taiwan Delta

3) Automatic length measurement

4) Automatic quantity measurement

5) Computer is used to control length and quantity. Machine will automatically cut to length and stop when required quantity is achieved

6) Length inaccuracy can be amended easily

Esquinero profile roll forming machine

The esquinero profile strip is a kind of profile that is used on the wall to make the corners more clean and beautiful. In addition to aesthetics, the esquinero profile strips reinforce the corners at the same time, avoiding dents and other damage in the corners. There are many types of corner bars that can be chosen according to the design of the building and personal preferences. I will introduce the metal esquinero profile and esquinero profile roll forming machine to you.

Check the drawing of esquinero profile

esquinero profile

Main parameters of esquinero profile roll forming machine

Manual decoiler

1).Material coil inner diameter: 480mm-550mm

2).Max coil width: 450mm

3).Carrying capacity: 2500kg

2.5T decoiler

Forming system

1).The materils of shaft:45#steel,outer diameter:40mm

2).Materil of the roller:SKD 11

3).Forming steps:9

4).Power of motor: 4 KW

5).Speed of the machine:15meter/minute

6).Transmission by gear

7).Dimension of the machine: 3.5 M× 1.2 M×1.4 M

8).Voltage: 380v 50hz 3phase

esquinero profile roll forming machine

Cutting system

1).Hydraulic cutting

2).Material of the cutter:Gcr12

3).Cutting system: advanced hydraulic drive, automatic cutting after forming,no distorting or wasting,high level safety factor,will not stop the machine to ensure the speed of cutting.

A video of esquinero profile roll forming machine

Drywall furring channel making machine

Drywall Furring Channel is a hat-shaped framing accessory designed to “furr” out any surface for the application of the final finish (ie. metal siding on steel studs, drywall on masonry, etc.). In addition furring channel used in conjunction with cold rolled channel is the ideal system for the construction of a drywall ceiling. To making drywall furring channel, we design the drywall furring channel making machine for you. I will detailly introduce it to you in the followings.

Drawing profile of the drywall furring channel

drywall furring channel

Main configs of drywall furring channel making machine

1).Shaft material: 45# steel,outer diameter: 50mm

2). Roller material:GCR12 MoV

3).Number of forming steps:11 steps

4). Main electrical machinery power: 5.5KW

5). Rolling speed: 20meter/minute

6).Transport:by gear

7).Voltage: 380v 50hz 3phase

drywall furring channel making machine

There is a video of this machine, please check