stud and track roll forming machine

stud and track roll forming machine

we can supply you with the different sizes of stud and track roll forming machines. the material thickness of the stud and track is from 0.3 mm to 1.0 mm. and the bottom size of the stud and track is normally from 25 mm to 100 mm. our machine adopt the plc control system, the machine is full automatic, you just need set the size and quantity on the touch screen then the machine will produce automatally.

our machine adopt the hydraulic cutting and punching. normally the forming speed of this machine is 25 meters per minute, but we can also produce the 50 meters per minute machine for the customer as the customer demand. our machine table is middle plate weld, this kind of table is very firm than the H shape steel beam。

The function of light gauge steel

if you have the demand of this kind of stud and track roll forming machine, please contact us, we will let you satisfied.

Quality light gauge steel

Quality light gauge steel

1, The quality of high-quality steel strip;
2, Light steel keel forming equipment;
3, The thickness of the light steel keel strip;
4, The double-sided galvanized quantity of light steel keel;
5, The appearance of quality;
Quality light gauge steel
Appearance quality Light steel keel shape should be smooth, clear edges and corners, not allowed to affect the use of incision and deformation. Galvanized layer must not have skin, tumor, loss and other defects. The appearance of quality inspection, should be 0.5m away from the product at the bright light conditions, the visual inspection. Light steel keel surface should be galvanized anti-rust, the double-sided galvanized: excellent product is not less than 120g / m * m, first-class goods is not less than 100g / m * m, qualified products not less than 80g / m * m.

How to Install the main keel

How to Install the main keel

1)The main keel should be hung on the boom. Main keel spacing 900 ~ 1000mm. Main keel is divided into light steel keel and T-shaped keel. Light steel keel can be used UC50 keel and UC38 keel. The main keel should be installed parallel to the room long, while the arch should be arch from the height of the room span of 1/200 ~ 1/300. Cantilever section of the main keel should not be greater than 300mm, or should increase the boom. The connection of the main keel should take butt, butt joint of adjacent keel should be staggered.
How to Install the main keel
2)Span is greater than 15m above the ceiling, should be on the main keel, every 15m plus a large keel.

The function of light gauge steel

The function of light gauge steel

Light steel keel, is a new type of building materials, with the development of China’s modernization construction, light steel keel is widely used in hotels, terminal buildings, station, playground, shopping malls, factories, office buildings, Building renovation, interior decoration, roof and other places. Light steel (paint) keel ceiling with light weight, high strength, adapt to waterproof, shockproof, dustproof, noise, sound, temperature and other effects, but also has a short duration, simple construction and so on.
The function of light gauge steel
Light steel keel is a high-quality continuous hot-dip galvanizing strip as raw material, the cold rolling process by rolling the metal skeleton of the building. It is used to decorate the non-load-bearing wall and the roof of the building made of plasterboard, decorative plasterboard and other light plates. For a variety of building roof decoration, the building’s internal and external walls and scaffolding ceiling of the base material.

The function of light gauge steel

Rib Lath Production Line

Rib lath is a kind of expanded metal lath stiffened with longiudinal ribs. The furring design of the mesh provides efficient background plaster for construction of partition. suspended celings and refurbishment works. The advantage of ribbed lath over metal lathng. that is supporting centers.which can be increased or widened.
Rib lath is ideal for relurbishing those damaged or aged masonry walls. When a key for rendering is not certain,due to disintegration or softening of the wall face, the lath should be fixed with apexes of ribs against the wall,and edge ribs of sheets connected each other,it should be wire-tied every 15cm and ends of sheets should be lapped which not less than 2.5cm.and nesting ribs are securely tied together. Stainless steel fixing should be used at sufficient intervals to hold the lath firnly in position.

Rib Lath Production Line
The Rib Lath Production Line Work Flow:
Decoiling-Punching-Feeding-Expanding&Forming-Shearing the Rib Lath to Cut to Length-Run out table

The full production line include the following components:
1.one set of sample decoiler or automatic hydraulic decoiler
2.one set of punching machine
3.two pieces of punching moulds.
4.one set of expanded and forming machine.
5.one set of cutting device.
6.one set of automatic stacker or simple run out support table.
7.one set of PLC console.
8.one set of hydraulic station.

Downpipe Roll Forming Machine

Downpipe Roll Forming Machine
Closed type colour coated steel downpipe is cold rolled and automatically edge interlocked by WLDP series downpipe roll forming machine,the finished products are of many features,such as good interlocking, no leak,beautiful integrity,long time using and so on. This series machine is matched with downpipe bending (elbow)machine,used for bending and end narrowing. The angle of bending can be adjusted by manual according to engineering requirements. Colour coated steel downpipe is widely used in workshop,warehouse,hangar,gym,and so on for industry&civil buidings.
WLDP series downpipe roll forming machine consists of uncoiler,infeed guides,fixed position driven forming stations,shearing device.Hydraulic station,PLC control console and so on. Our company has dozons of profile models for this series roll forming machine
such as WLDP93-134,WLDP89-118,WLDP75-110,AND ETC. We can design different kinds of profile for downpipe machine,as per customers’ requirements.

Downpipe Roll Forming Machine
Working Flow
Uncoiling-Sheet Guiding-End Cutting-Roll Forming-Measuring Length&shearing-Sheet to Support Table
Main Technical Parameters

Item WLDP
Downpipe section specification 134*93118*89
Material Type Color steel sheet
Thickness 0.45-0.55
Yield stress 230-300
Max.Forming speed 10
Roller material 45#steel with chrome
Roller driven type  chain transmission
Controller PLC
Operation Touch screen and button
Hydraulic system pressure 12
Hydraulic station motor power 7.5
Main motor power 3
Total power 10.5
Total weight  about 8000

700 Automatic shutter doors machine Products

700 Automatic shutter doors machine Products

700 type automatic shutter doors Technical Data Sheet
Equipment Total length: 10m width 1.3m height 1.8m
Motor power: 5.5Kw + 3Kw voltage 380V
Production speed: 8 – 10 m / min
Transmission: chain drive
Molding machine axis: 700 22 row axis. Large frame: 250H steel, upright plate 12mm
Shaft material: 45 # steel
Wheel Material: 45 # steel hard chrome plating
Forming part: Seiko-type wheel rotational molding, forming a good effect, reducing the friction between the wheels and raw materials, debugging convenient, fast.
CNC system: PLC panel, KEL-320 display
Counter: the use of domestic optical rotary encoder, A40S6-600-2-12-ACP
Cut: 3Kw Pumping Station

700 Automatic shutter doors machine Products
700 type automatic shutter door products for a variety of industrial plants, warehouses and other roofing production has a high peak, high strength advantage, lap install safe, reliable, waterproof and anti-riot units and strong performance characteristics, the aircraft production to solve the pressure plate conventional series pressure plate roof leakage problem, with the bagging machine can be made without beam vaulted roof.
(1) This device uses a high level of color steel automatic control software, production information management.
(2) the entire unit automation control system uses a highly integrated network, automation systems and better performance.
(3) Automatic shutter doors machine 700 also has the operation, maintenance, service and commissioning of machinery, molds advantages of easy replacement.

Rolling Shutter Machine Parts

Rolling Shutter Machine Parts

We manufacture a wide range of Rolling Shutter machines which are widely appreciated by our clients. Our production process conforms to various industrial standards which ensure qualitative output by utilizing the resources to an optimum level.

Rolling Shutter Machine Parts

Rolling Shutter Machine Parts

We manufacture these Rolling Shutter Machine Parts as per the industrial norms, in order to provide the clients optimum satisfaction. The offered machine parts offered by us are of the best quality, owing to their construction using high grade raw materials. Known to increase the efficiency of the rolling shutter machines, the parts provided by us are highly effective and asked for. Further, we provide these products at a rate which is quite reasonable.

Features:

High Quality

Good Service

Comparative Price

POP Channel Roll Forming Machine

Pop Sheet Roll Forming Machine

Gurukrupa Industries manufacturing best quality POP Sheet Channel Roll Forming Machine in India also exporting worldwide. Most advanced yet simplest design and robust structure ensures precise performance, easy operation and higher efficiency. These machines are available with ‘manually’ as well as ‘automatically control’ panel.
D coiler 5 ton cap.
Entry Gate with
Roll Forming Line with 18 stations, 10 H.P. electrical.
Control Panel semi auto
Cutting Unit (Hydro.)

z purline roll forming machine
Technical Specifications
Maximum sheet width that can be formed : 1250 mm
Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm
Horizontal distance between shafts : 500mm
Number of forming stations : 16 nos.
Total HP for Line : 8
Speed of the machine : 10 -14 mt / mint
Size of machine : 9500 x 1700 x 1100 mm
Mandrel Uncoiler
Coil weight : 5 MT Max
Coil width : 1250 MM
Coil bore : 450 MM min, 510 MM max dia.
Mandrel movement : Manually adjusted
Back Tension : Manually adjusted
Entry Gate
Entry gate will be provided for movement of sheet to roll former.
Main Base
the main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

T Grind Roll Forming Machine

T Grind Roll Forming Machine

We provide you the fully automatic T Grid Roll Forming Machine with punching of T-bars in the various models and Forming sizes. Our manufacturer is one of the earliest one in India to develop the main T grid roll forming machines. So we have ability to design custom t grid roll forming machines according to customer sample or profile drawings.
Technical Specifications

Maximum sheet width that can be formed : 100 mm
Maximum sheet thickness in Strips that can be formed : 0.6 mm
Horizontal distance between shafts : 200mm
Number of forming stations : 16 + 5 nos.
Vertical station : 6 nos.
Total HP for Line : 5 + 3
of the machine : 4 mt/minit
Size of machine : 2500 x 900 x 1000 mm + 1500x900x1000mm

Wall-angel-roll-forming-machine-16

Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.