Ceiling T type keel roll forming machine

Ceiling T type keel roll forming machine is a professional machine to produce ceiling t type keel in batch. The T-type keel ceiling is a new type of lightweight decorative structure. It is a new type of roof system that is composed of an aluminum alloy keel as the supporting skeleton and a decorative cover panel. For making the whole set ceiling T gird, you need to make main T, cross T and wall angle roll forming machine. The machine is composed by the following elements: decoiler, hydraulic punch press, feeding device, roll forming machine, straightening device, hydraulic cutting off, cold water recycling device, pneumatic and electric control system, etc.

Here is the some drawing profiles of ceiling t type keel

T type keel

Features of  ceiling T type keel roll forming machine:

  1. Full automatic and fast speed.
  2. Low energy consuming, no matter from workforce or electricity.
  3. Easy to operate, normally speaking one week then you can learn how to run it.
  4. The main T grid made by our machine is beautiful in shape and solid when using.

Here is a picture of ceiling t type keel roll forming machine for your reference

ceiling t type keel roll forming machine

Parameters of this machine

Material thickness:0.3-0.6 mm
Roll station: 16 stations
Motor power: 7.5 kw
Productivity: 30 m/min
Type: automatic

 

Angle Channel Truss Furring Roll Forming Machine

Angle Channel Truss Furring Roll Forming Machine

China Best Sale Ceiling T Grid Machine With Good Quality
1. Model:“T” bar
2. Raw material: galvanized steel sheet, Prepainted steel shee
Galvanized steel sheet: 0.2—0.35mm, prepainted steel sheet: 0.25—0.3mm
3. Production specification: T keel 38 x 24mm (H x W)
4. Technical parameter:
a. Voltage 380V 50Hz (adjusted according to customer’s requirement)
b. Roll forming machine power: 3.0 KW; drive motor of hydraulic station: 15KW; transmission motor: 1.5 KW
c. Material of roll: Cr12mov quenching hardness HRC 58-
5. Craft: uncoil — form — align — automatic punch, cut — finish product

Angle Channel Truss Furring Roll Forming Machine
1. Continuous automatic produce
It enters punching section after roll forming. Forming machine will stop to work once the length reaches setting length. The rotary encoder will signal to punching machine for punching. The finish production will fall automatically after punching. Conveyor will send out finish production from punching machine. And then forming machine will start to work; so that complete cycle operation.
Transmission system: drive by servo motor; install gearbox; whole production line is gear drive.
Forming speed: max. speed 25m/min; speed is adjustable
Hydraulic punch – cut system: automatic type, complete it one time.
Precision: ±0.2mm in total length, ±0.1mm in pitch of holes
It adopts high pressure, high speed for hydraulic system; install water cooling system; continuous produce for 24 hours.
Capacity: 5 pc/min; workpiece of T bar 3.66m in length
Space required: 19 x 4 x 1.5m (production line)
Independent power distribution cabinet, independent touch screen panel
It adopts steel sheet welding for whole production line; engine base of tamping machine and punching machine are welded first, and then processed after heat treatment.

Fully main T bar rolling forming machine- newly update

Full automatic main T bar rolling forming machine could help you to make T grid without person intervention. From roll forming to punching, this machine could make all perfect product with fast speed. The machine could make main T grid in the speed of 25 m/min. There is a T bar profile for your reference in the followings. T bar light steel is a new type of building material. With the development of modernization in China, T bars are widely used in hotels, terminal buildings, train transportation stations, railway stations, playgrounds, shopping malls, factories, office buildings, and old buildings. Renovation, interior decoration settings, ceilings and other places.

T bar rolling forming machine

Features of T bar rolling forming machine:

1. Full automatic and fast speed.

2. Low energy consuming, no matter from workforce or electricity.

3. Easy to operate, normally speaking one week then you can learn how to run it.

4. The main T grid made by our machine is beautiful in shape and solid when using

Components of T bar rolling forming machine:

1. Double head decoiler for different types coil.

2. Main roll forming machine.

3. Hydraulic punching and servo cutting device.

4. PLC control station.

5. Runout table.

Working process of full automatic main T grid roll forming machine:

Uncoiler—Entry Beach—roll forming machine—punching—cutting to length—run-out table.