50/70/100 Light keel Roll Forming Machine

50/70/100 light keel roll forming machine is the combined light keel rolling forming machine. It belongs to all in one machine, which means by this one machine, you can make 50 channel, 70 channel and 100 channel. But when adjusting, you need to know how to adjust the spacer. For the 50/70/100 light keel, here are some drawing profiles for your reference:

drawing profile of light keel

Here are the real pictures of 50/70/100 light keel: 50-75-100 light keel

50/70/100 Light keel roll forming machine:

50-75-100-light kell roll forming machine

Here are machine parameters for your reference:

1.Manual decoiler

1).Material coil inner diameter: 500mm-600mm

2).Max coil width: 600mm

3).Carrying capacity: 1500kg

2.

1).Shaft material:45# steel,outer diameter:50mm
2). Roller material:GCR12Mov
3).Number of forming steps:11steps
4).Main electrical machinery power: 5.5 KW
5).Forming speed: 25m/min
6).Transport:by gear
7).Voltage: 380v 50hz 3phase or customize

Sometimes maybe you need to punch logo or holes on the finished products, please refer to the following pictures:

punching holes

Hydraulic shearing:

1).Hydraulic cutter

2).Blade and mold material: Cr12 steel with quenched treated 60-62℃

3).Cutting system: advanced hydraulic drive, automatic cutting after forming,no distorting or wasting,high level safety factor,will not stop the machine to ensure the speed of cutting.

 

 

 

For this machine, if you want to know more video and more details, please contact cnzt002@zhongtuocn.com. Or contact me by whattsapp 008615127755788.

Quotation-60*27-28*27 Light Keel Roll Forming Machine

60*27-28*27 Light Keel Roll Forming Machine is something like combined type light keel machine. By this one machine, you can make 60x27mm stud, 27x28mm track and others. All those three elements is quite important for drywall building. When you need to start drywall work project, I feel this one machine is enough for you.

The machine can process material: GI  and others               Material thickness:  0.4—0.8mm
Material hardness: 550 MPA—350 MPA                                  Formed width: 28/60mm
Forming speed: 20m/min

Here are some drawing profile for your reference:

1

The machine is composed by the following elements: decoiler, leveling beach, roll forming machine, shearing and punching system and the runout table. The machine is fully automatic and controlled by PLC. So you can control machine working speed, shearing length and accuracy.

Here are the machine elements details for your reference:

Decoiler:

Usage: It is used to support the steel coil and uncoil it in a turntable way. Passive uncoil pulled by roll forming system
Loading capacity: 1.5T       Uncoiling width: 300mm       Inner diameter: 450-550mm

Entry Beach

Usage: Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate board.

Main Roll Forming System

Feature : Ensure stability , precision and lifetime.
Usage: In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, gear transmission( the first and the last roller, the down roller should be attached with the upper one with the gear drive.), roller surfaces polishing, hard plating , heat treatment and galvanization treatment . The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
Length of the main part: about 3000х1000х1400
Weight of main part: 3 tons
Voltage : 380V/50HZ3Phase (as customer’s request)
Roller fixer : Guide column
Frame : middle plate welded
Memorial arch frame type
Frame thickness:25mm
Drive mode: gear
Material of rollers: GCr12MoV
Material of shafts: 45# steel with tempering
Diameter of shafts: φ40mm
Number of rollers : 10 rollers
Main power: 3kw
Cycloidal planetary gear speed reducer)
Double working lines on the machine to finish the two profiles. Change the feeding unit to make another profile, the cutting head can move left and right by hand!

Shearing Mechanism

Feature : Ensure stability, precision and cutting speed
Function : Automatic cutting controlled by PLC
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Gcr12MoV quenched
Power supply : hydraulic power
Frame : Pillar style with rack & pinion system
Stroke switch :  non-contact photoelectric switch
Components: It contains one set of cutting tools, one hydraulic tank and one cutter machine.

Here is the each part picture of machine for your reference:

purline

For this machine, if you want to know more information, please contact me at any time or sending us an email to cnzt002@zhongtuocn.com