Metal IBR tile making machine

Metal IBR tile making machine could be made by one machine fully automatically in batch. The machine can do the production in the speed of 25 meter per minutes. The good thing of this machine is that it either could be used to make IBR tile or glazed tiles. As to do the stepnism or not, depends on your requirements.roll forming machine

Take the following drawing profile for example to show how the machne works:

The Metal IBR tile making machine designs:

Parameters of roll forming machine:

(1) Material of frame: (high grade) 400 mm‘H’ shape steel welding

(2) Thickness of whole plate not welding middle plate: 20mm

(3) Step of roller: 13 steps

(4) Diameter of shaft solid shaft:74 mm

(5) Material of shaft solid shaft: (high grade) 45# Steel,quenching and tempering treatment

(6) Material of roller: 45# Steel

(7) Treatment of roller: hard chromize coated 0.05-0.07mm

(8) Drive type of roll forming machine: drive by chain

(9) Chain: 25.4mm (high grade)

(10) Bearing: 6210 (high grade)

(11) Reducer: 5# cycloid reducer (high grade)

(12) Power of main motor: 5.5KW

(13) Voltage: 380V/50Hz/3phase

(14) Motor power of hydraulic station: 5.5kw

(15) Line speed: about 3-5 m/min

(16) Oil pump of hydraulic station: gear oil pump (high grade)

(17) Hydraulic cutting: cutting controlled by PLC

(18) Accuracy of cutting: +/- 2mm

(19) Razor blades material: Cr12, quenching 58-62 °.

(20) Appearance size of main forming machine: 7m (length)*1.6m (width) *1.4m (height)

(21) Electrically controlled system: entire machine controlled by PLC


(23) Frequency converter : DELTA(TAIWAN)

(24) Frequency converter power: 5.5KW

(25) Encoder: ROUNDSS (high grade)

(26) Controlling desktop: text screen (high grade)

(27) Electrical parts: DELIXI or CHINT

The advantage of this Metal IBR tile making machine:

  1. It can make any width IBR metal sheet sna glazed tiles separately. Only adjust the input the coil width then it can make related width sheet.
  2. For the stepnism, you can choose to use or not. When using, it make galzed tiles.When not using, it can make IBR metal tiles.
  1. It takes very good hydraulic jacks for powerful shearing and stepping.All the poles have oil holes, by adding more oil, it can make the machine use long time.

We will give the protection cover for Metal IBR tile making machine, when machine working, it can protect the workers in some degree.Meanwhile we will give the remotor, it can help you control the machine instead of PLC in some degree.