When you need to make C purline in different sizes, L purline or U shape purline by one machine and the mateiral thickness already reach to 5mm from 1.5mm, our factroy heavy duty C purline, L purline roll forming machine will be your best choice.
In some cases, when building factroy, we do not have too much space to put many machines. Or at the beginning, we do not have too much budget to buy many machines. Then one machine, many sets of moulds will be the better option. Bsed on the needs, we develop new tech machine, which can be changed mould and spacer easily.
Features of Heavy duty C purline, L purline roll forming machine:
1.Support many types drawing profile.
2.Easy to change spacer and easy to change mould.
3.Using gearbox as the transmision method.
4.Using Memorial Gateway structure to make sure machine have enough power to process 5mm thickness material.
5.Hydraulic decoiler with loading car, supporting unit and pressing arm.
6.High tech leveling system to make sure input coil neat and clear.
Take the following drawing profiles for example.
Fro example, when you need to make those three drawing profiles by one machine, we will design machine like the following parameter list:
|Usage: It is used to support the steel coil and uncoil it in a turntable way.
Passive uncoil pulled by roll forming system
Loading capacity: 10T
Uncoiling width: 800mm
Inner diameter: 450-550mm
With the coil feeder
|Usage: Put the raw material (steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
Roller quantity: 13 rollers
|Roll forming part
|Usage: this part will change the punched material to the shape of you required.
Length of the main part: about21000х2200х1600
Weight of main part: 32 tons
Voltage:380V/50HZ3Phase(as customer's request)
Roller fixer : Memorial Gateway
Frame : Bolt arch structure
Memorial arch frame type
Drive mode: gearbox as transmission
Material of rollers: GCr15 quencing 58-60°
Material of shafts: 45# steel with tempering
Diameter of shafts: φ120mm
Number of rollers : 16 rollers
Main power: 30kw
Cycloidal planetary gear speed reducer）
|Flying Shearing and cutting part
|Feature: Ensure stability, precision and cutting speed
Function : Automatic cutting controlled by PLC
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Power supply : hydraulic power 15kw
Frame : Pillar style with rack & pinion system
Stroke switch : non-contact photoelectric switch
Components: It contains one set of cutting tools, one hydraulic tank and one cutter machine.
|It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pump drives the cutter machine to begin the cutting job.
Hydraulic motor Power:3kw
Hydraulic oil: 46#
Components: The system includes a set of hydraulic tank, a set of hydraulic oil pump, and two hydraulic pipes.And two sets of electromagnetism valves.
|Electric Control System
1.Adopted PLC, transducer, touch panel from Delta Taiwan to ensure high speed with stability, precision and lifetime.
2.Other electric element are Delta Equipped with movable switch, air break, radiator, transformer & electric leakage protector for operation convenience and safety.
||One counter gauges length, pulses, and decides length.
Omron encoder for length measurement.
||It adopts welded steel and supported roller to transmit the products.3m/set
|For this machine, we will take gearbox as transmission method. For one aspect, the material is too much thick and another aspect is for making the machine working steady.
Reducer: 650Pm reducer
If you want to know more information about this machine, please contact us at any time. Or please pay more attention to our knowledge base, we will updater information now and then.