U track roll forming machine

Product Details

If ceiling participation needs big loading ability or a large area building of the ceiling, U shape keel as the carrying keel is necessary. When installation, first U type bearing keel and then install (main keel) hanger which will be U-shaped main keel and the boom of connection, and then T bar participation.
Just talking from ceiling partition, U shape keel is used widely. Same it also could be used as the bearing keel in drywall building.
According to the usage of the U track, the sizes will be different. So our U track roll forming machine could be used to make various sizes too by adjusting the spacer or fully automatic. Here are some drawing profiles for your reference:

Here is the machine picture for your reference:

The U track roll forming machine is composed by the following elements: Decoiler, leveling beach, main roll forming machine, shearing system, PLC control system, hydraulic station and run out table.
1.For the Decoiler, you can choose manual Decoiler, motor Decoiler and hydraulic Decoiler.
2.For the leveling beach, we use 7 rollers three up and four down.
3.For the main roll forming machine:
Usage: In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, gear transmission (the first and the last roller, the down roller should be attached with the upper one with the gear drive.), roller surfaces polishing, hard plating, heat treatment and galvanization treatment. The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
Length of the main part: about 2900х800х1400
Weight of main part: 3 tons
Voltage: 380V/50HZ3Phase (as customer's request)
Roller fixer: Guide column
Frame: middle plate welded
Memorial arch frame type
Frame thickness: 25mm
Drive mode: gear
Material of rollers: GCr12MoV
Material of shafts: 45# steel with tempering
Diameter of shafts: φ40mm
Number of rollers: 8 rollers
Main power: 3kw
Cyclical planetary gear speed reducer)

4.Shearing system:
Feature: Ensure stability, precision and cutting speed
Function: Automatic cutting controlled by PLC
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Gcr12 quenched
Power supply: hydraulic power
Frame: Pillar style with rack & pinion system
Stroke switch: non-contact photoelectric switch
Components: It contains one set of cutting tools, one hydraulic tank and one cutter machine.

Here are some U track installation drawings and pictures for your reference:

Here is the machine working video of U track roll forming machine for your reference:

When need for final quotation, please contact us at any time.


Leave a Reply