Aluminum Rain Water Gutter Roll Forming Making Machine
Aluminum Rain Water Gutter Roll Forming Making Machine
Now, the aluminum rain water gutter roll forming making machine is becoming more and more popular. It is not only can be made according to your requirements but also can produce beautiful products. Here is the detail information about the machine, please check.
| Configurations | Manual Uncoiler, Main Machine Of Roll Forming, Electric Motor, Stamping Device, Cutting Device, Hydraulic Station, PLC Control, Output Table |
| Control System | Automatically Length-Setting Touch Screen PLC & Inverter |
| Main Frame | Welded structure |
| Main Power | 5.5 kw |
| Pump Power | 4 kw |
| Power Supply | 380V, 3-Phase |
| Forming Speed | 8-12m/min |
| Roll Station | 18 stands |
| Roller Diameter | 80mm |
| Feeding Thickness | 0.8-1.5mm |
| Roller Standard | 45# steel with Chrome Coating heat treatment |
| Overall Size | About 7000×800×1200mm |
| Total Weight | About 4.3T |
(1) Manual Decoiler (Max.Capacity:2T Coil Inner-Diameter: 508mm)
(2)Roll-Forming M/C (Just for your reference, will make the machine as your drawing)
(3) Cutting Mechanism
It adopts hydraulic motor drive and automatic location to decide the dimension and cut the target products.
(4)Computer control cabinet :
1). Screen: DELTA screen from Taiwan
2) PLC: DELTA
3). Automatic length measurement
4). Automatic quantity measurement
5).Computer is used to control length and quantity. Machine will automatically cut to length and stop when required quantity is achieved
(5)Counter
One counter gauges length, pulses, and decides length
(6)Output table (3M one set)