Ceiling panel forming machine
This type of sheet can be widely used in plant, house, storage and simple steel roof and wall. It has advantage of pretty appearance, durable using and so on. There are some main elements of the ceiling panel forming machine in the following.
|Usage: It is used to support the steel coil and uncoil it in a turntable way.
Passive uncoil pulled by roll forming system
Loading capacity: 3T
Uncoiling width: 300mm
Inner diameter: 450-550 mm
Feeding and leveling:
|This part will level coil to make sure it is neat clean and straight.
Meanwhile the roller will punch dots at both side of the C channel.
|Option A: plain
Option B: dotting
OptionC: with two ribs
The embossing roller, could be adjusted, use or not, both okay. Each set of roller is 800USD
|Size: 5500*1200*1400 mm
Weight t: 4.8 tons
|Material of blades: Gcr12 quenched
Power supply : hydraulic power
Frame : Pillar style with rack & pinion system
Stroke switch : non-contact photoelectric switch
We will give 9 pieces of cutting balde for you to change to fix those
different drawing profiles.